A used Scandia wood stove typically costs $300-$1,500 in the U.S., with many ordinary, working examples priced near $800 before delivery, repairs, or installation. The final Scandia wood stove price depends on model, condition, included parts, local availability, and whether the stove can meet current installation and emissions requirements.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Scandia stove | $300 | $800 | $1,500 | Asking-price range for common used units; condition and model matter. |
| Inspection and basic cleaning | $150 | $300 | $600 | Professional check before installation; repairs are extra. |
| Freestanding installation | $1,000 | $2,500 | $5,000 | Assumes a suitable chimney or a straightforward listed chimney system. |
| Stove plus installation | $1,500 | $3,500 | $7,000 | May exclude major chimney work, structural changes, and taxes. |
What a used Scandia stove usually costs
Most buyers should budget $500-$1,200 for a presentable, usable used Scandia stove, with lower-priced listings often needing work and higher prices tied to desirable models, excellent condition, or included accessories. These are resale-market estimates, not prices for a new Scandia product; availability varies because many Scandia stoves encountered in the U.S. are older units.
A basic stove may sell for $300-$600 if it has surface rust, missing accessories, uncertain service history, or a local pickup requirement. A complete, clean example with intact firebrick and functional door hardware may bring $700-$1,200. Rare, restored, or particularly large units can be listed at $1,200-$1,500 or more, but asking prices do not guarantee a sale at that amount.
The stove itself is only one part of a safe, operating setup. A buyer might pay $200-$500 for local transport and handling, $150-$600 for inspection and minor service, and $1,000-$5,000 for installation, depending on the chimney and floor protection. Assumptions: used stove, standard residential access, no major masonry repair, and typical U.S. contractor rates.
How firebox parts, chimney work, and labor shape the quote
A written estimate should separate the purchase price from inspection, repairs, venting, and installation. This matters especially for an older stove: a low listing price can be offset by missing parts or a chimney that needs replacement. The ranges below describe common U.S. project components, not a fixed package price.
| Cost component | Typical range | How it affects the bill | Pricing unit |
|---|---|---|---|
| Stove purchase | $300-$1,500 | Model, condition, completeness, and seller determine resale value. | Per stove |
| Inspection and cleaning | $150-$600 | Includes a basic check and cleaning; parts or extensive repairs cost more. | Per visit |
| Minor stove repairs | $100-$800 | Gaskets, firebrick, hardware, or small repairs vary by part availability. | Per repair job |
| Chimney and connector | $300-$2,500 | Connector pipe, chimney sections, and needed components can add up. | $30-$150 per ft for many listed components |
| Installation labor | $500-$2,000 | Set-up, clearance work, and connection depend on access and job scope. | $75-$125 per hour |
| Hearth and delivery | $200-$1,200 | Floor protection and transport vary with size and distance. | Per project; delivery often $100-$500 |
Contractors may quote labor as a package rather than disclose hours. For an hourly estimate, shows the basic calculation: a 6-10 hour crew visit at $75-$125 per hour per billed worker can represent $450-$1,250 in labor before materials and any separate inspection fee. Confirm whether the quoted rate is per worker, per crew, or a fixed project charge.
Model age, firebox condition, and stove size change value
Condition and usable parts usually matter more than the name on the door. A model with a sound firebox, closing door, intact baffle, and available replacement parts can justify a higher price than a similarly sized stove with uncertain history. Ask the seller for the model number, approximate age, measurements, and clear photographs of the interior, door, flue collar, and any damage.
Firebox cracks, warped plates, damaged welds, or missing internal components can make a $300 stove a poor bargain. Depending on part availability and shop time, a repair allowance of $200-$800 is plausible for moderate work; severe damage may make replacement more economical. A technician should assess whether the unit is safe and repairable rather than relying on a seller’s description.
Stove size also affects transport, installation, and suitability. A compact unit weighing roughly 150-250 pounds may be easier to move than a larger stove weighing 300 pounds or more, which can require additional handlers or equipment. Heat output must match the space and installation conditions; choosing a larger firebox simply because it costs only modestly more can lead to poor operation in a small room.
Older models may not have current EPA certification or documentation. That can limit where they can legally be installed or sold, and local rules may be stricter than federal requirements. Confirm the exact model’s status with the local building department and installer before paying a deposit. Assumptions: resale price reflects the appliance only and does not certify safety, code compliance, or emissions eligibility.
Why chimney height and floor protection can add thousands
A straightforward replacement in a home with a suitable, inspected chimney may remain near the lower end of installation pricing. A new chimney, roof penetration, masonry repair, or difficult access can raise the project total substantially. A quoted price should identify the chimney type, pipe length, hearth dimensions, and any required clearance adjustments rather than using a vague “standard installation” description.
Chimney length is a major cost driver. Adding 10-15 feet of listed chimney components can add roughly $500-$2,000 or more for materials and related labor, depending on system, roof height, and routing. A flue that needs a liner or a masonry chimney that fails inspection can add another $1,000-$3,500 or more. Roof pitch, scaffolding, and multiple stories may increase labor further.
Floor protection and wall clearances depend on the stove’s listing and installation manual. A basic hearth pad may cost $200-$600, while custom stone or tile work can reach $800-$2,000. Heat shields or other clearance work may add $150-$700, but they cannot be assumed to reduce required clearances unless the installation instructions and code permit them.
Permits and inspections are local expenses. A permit may cost $50-$300, while a required inspection or chimney assessment can add $100-$300. Some jurisdictions require permits even when an existing stove is replaced. Do not budget from the stove’s purchase price alone when the venting system has not been inspected.
How long Scandia stove installation takes
A professional installation using a sound existing chimney often takes 4-8 hours on site. A job involving a new chimney, roof access, hearth construction, or masonry repairs can take 1-3 days, sometimes with separate visits for inspection and installation. The schedule may depend on permit approval and availability of the correct chimney components.
Common labor rates for qualified stove or chimney work run about $75-$125 per hour, though urban markets and specialized roof work can be higher. A two-person crew may be billed as a crew rate or by worker-hours, so the estimate should spell out the method. Ask whether removal of an existing appliance, cleanup, and final operating checks are included.
Delivery is usually separate when buying from a private seller. Local pickup may cost nothing if the buyer handles loading, but professional delivery and placement commonly run $100-$500, with stairs, long carry distances, or a heavy stove raising the charge. Verify the stove’s weight and access route before arranging transport; moving an older cast-iron unit without suitable equipment risks injury and damage.
Used Scandia versus a new EPA-certified stove
A used Scandia can have a lower upfront price than a new stove, but an older unit may require repairs and may not qualify for installation under local rules. New EPA-certified wood stoves commonly cost about $1,500-$4,000 for the appliance, with premium models reaching $5,000 or more. A new stove installation often totals $3,000-$8,000 when venting and standard labor are included.
Compare the whole project, not just the appliance. For example, a $600 used Scandia plus $500 in repairs and $2,500 in installation totals $3,600. A new $2,500 stove with a $2,000 straightforward installation totals $4,500, before any major chimney work. The new option may have a manufacturer warranty and clearer documentation, while the used option may offer savings if it is sound, legal to install, and compatible with the existing setup.
Replacement parts can be a decisive issue. Before buying, ask a stove technician whether door seals, firebrick, baffles, and other needed components can be sourced. If critical parts are unavailable, the repair budget is uncertain. A used stove is most price-competitive when it is complete, inspected, and suitable for an existing compliant chimney.
Regional labor and delivery rates across the United States
Installation quotes can vary by roughly 10%-25% between lower-cost rural markets and high-cost metro areas, though local competition and chimney conditions can outweigh broad regional averages. Northeast and West Coast cities often have higher labor and permit charges than many Midwestern and Southern markets. Rural buyers may pay less per hour but more for travel or delivery from a distant specialist.
Expect delivery to rise when a seller is far away or the route includes limited-access roads, stairs, or long carries. A 50-mile delivery may add $150-$400, while a longer trip can cost more or require separate freight arrangements. For a heavy stove, compare the total price of a local unit with a cheaper distant listing after transport, loading, and inspection are included.
Heating demand and contractor availability can also affect timing. In colder regions, installers may book up before winter, making urgent work harder to schedule. Local quotes should be compared for identical scope: chimney inspection, connector parts, floor protection, permit handling, disposal, and startup checks. Regional ranges are planning estimates; local written bids are more reliable than a national average.
Which Scandia quote items can be reduced safely
The safest savings come from avoiding unnecessary scope, not skipping inspection or code requirements. Compare at least three written bids that list the same chimney work, clearances, hearth materials, labor, and permit responsibilities. A quote that appears $500 lower may exclude pipe, delivery, or a required liner.
Buying locally can reduce delivery costs and makes it easier to inspect the stove in person. Request a price adjustment if the unit is missing removable accessories or needs documented minor repairs, but do not assume a low asking price covers professional restoration. Confirm the model and part availability before committing, and avoid paying extra for cosmetic refinishing that does not improve safe operation.
Keep the project to required work. Reusing a chimney is a potential saving only after a qualified inspection confirms that it is appropriate for the appliance and in sound condition. If a hearth is already compliant and undamaged, ask whether it can remain. If the existing venting is unsafe or incompatible, replacing it is usually preferable to patching it just to reduce the initial bill.
Schedule nonurgent work before peak heating-season demand when contractors have openings, and coordinate inspection, delivery, and installation to avoid repeat trips. Ask about a bundled price for inspection and installation, but check that the written quote includes all required materials. A practical purchase ceiling is the stove’s price plus repairs, transport, installation, and a contingency of roughly 10%-15% for unexpected site work.