The Singer sewing machine E99670 price depends on whether the listing refers to a complete machine, a used unit, or a part or identifier associated with a Singer model. For a complete computerized Singer machine in comparable condition, buyers commonly budget about $250-$600 new and $100-$350 used; exact pricing depends on the model number, included accessories, condition, and seller.
Before paying, check the model plate and listing details: “E99670” alone may not identify the machine’s retail model. Confirm the full model number and what is included before comparing prices.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New complete computerized Singer machine | $250 | $425 | $600 | Comparable machines; price varies by model and sale |
| Used, working machine | $100 | $225 | $350 | Condition, accessories, and local demand matter |
| Basic service or tune-up | $75 | $125 | $200 | Cleaning, adjustment, and inspection; parts extra |
| Replacement foot pedal or power accessory | $20 | $40 | $80 | Confirm compatibility with the exact model |
What a complete Singer E99670 machine usually costs
There is no reliable single retail price for “E99670” unless the listing identifies the machine’s actual model and condition. If it is a complete computerized Singer machine with a similar feature set, a typical new price is about $250-$600. The middle of that range is roughly $425 for a current or recent model sold with its standard presser feet, power cord, pedal, and accessories.
Older discontinued models may appear at higher prices when sellers describe them as rare, but that does not guarantee a higher resale value. For a used machine that sews properly, expect approximately $100-$350. A tested machine with its manual, pedal, extension table, and multiple feet can command more than an untested unit sold as-is.
For budgeting, use $425 as a comparison point for a new comparable machine and $225 for a tested used one. These are broad U.S. retail estimates, not a confirmed manufacturer price for E99670. Sales tax, shipping, and marketplace fees may raise the checkout total.
Assumptions: Complete household sewing machine, standard accessories, ordinary U.S. retail availability, and no major repair or missing parts.
How the machine, accessories, and seller shape the quote
A listing price may cover only the machine body, or it may include the pedal, cord, feet, case, and accessories needed to use it. Compare the contents before judging a bargain. A low advertised price can become less attractive if a compatible pedal, bobbins, or a replacement foot set must be purchased separately.
| Quote component | Typical price | What changes the amount | Buyer check |
|---|---|---|---|
| Machine body | $100-$350 used; $250-$600 new comparable unit | Model, age, condition, and warranty | Read the complete model plate |
| Pedal and power cord | $20-$80 | Connector type and genuine versus compatible part | Confirm fit for the exact model |
| Presser feet and small accessories | $10-$60 | Number, type, and whether parts are original | Inventory included pieces |
| Shipping or local delivery | $0-$60 | Distance, packaging, and seller policy | Check the delivered total |
| Inspection or tune-up | $75-$200 | Shop labor, cleaning, adjustments, and parts | Ask what the service includes |
Retailers may offer a return window or limited warranty, while private-party sales often provide neither. A return policy has practical value if the machine arrives with timing, tension, or electronic problems. Compare the final price after shipping and tax rather than comparing only the listing headline.
The complete, tested package—not the lowest body-only price—is the fairest basis for comparison. Repair estimates should identify labor and replacement parts separately so the buyer can compare the repair with the price of another machine.
Which model number, condition, and stitch features change the price?
The most important detail is the full model number on the machine’s identification plate. A short code or seller-entered “E99670” may be incomplete, may refer to a product identifier, or may be confused with a different Singer model. Check the manual, serial or model label, and listing photographs. Feature counts and accessory compatibility differ between models, so a price comparison based only on the brand is weak.
Condition creates a substantial used-price spread. A machine that completes a test seam in straight stitch and zigzag, reverses properly, and feeds fabric evenly may sell for $150-$350. A unit with a cracked case, untested electronics, missing pedal, or uncertain stitch function may be closer to $50-$150, though repair costs can erase the savings.
Computerized models with a wider selection of built-in stitches, buttonhole options, speed controls, or an extension table usually cost more than a basic mechanical machine. For a comparable new Singer, feature-rich models can reach $400-$600, while simpler models often sit nearer $150-$300 during promotions. The exact model and sale timing determine where it lands.
Included accessories can shift a used deal by roughly $20-$80, especially if the pedal or a model-specific component is missing. A seller’s claim that a machine “works” is less useful than a short demonstration showing the needle moving, stitches forming, and feed dogs advancing fabric.
Verify the full model and request a working-stitch test before paying a premium. If an online listing provides no model-label photo, ask for one before purchasing, particularly when the title relies on E99670 alone.
Why repair labor and replacement parts can push the total higher
Independent sewing-machine shops commonly charge about $75-$150 for a routine cleaning and tune-up, with higher rates in expensive metro areas or for computerized units requiring additional diagnosis. A more involved repair may total $150-$300 or more when parts and labor are combined. A technician can quote more accurately after identifying the model and testing the machine.
Service labor often falls around $75-$125 per hour, although some shops charge a flat diagnostic or service fee instead. For example, 1.5 hours at $90 per hour equals $135 in labor before parts, tax, or any shop minimum. Ask whether the initial inspection fee is credited toward approved repairs.
Common low-cost fixes include replacing a needle, correcting threading, or installing a compatible pedal. Timing problems, motor faults, damaged electronic controls, or unavailable model-specific parts can cost much more. A $200 repair on a used machine valued near $225 may not be economical unless the machine has features or sentimental value that are difficult to replace.
Parts availability depends on the exact model and its age. Generic needles and bobbins are inexpensive, but the correct bobbin type must be confirmed; incorrect parts can cause poor stitching or damage. Pedals, circuit boards, and specialty feet may cost $20-$150 or more depending on compatibility and availability.
Get a written diagnosis before approving repairs above about $150. The estimate should separate inspection, labor, parts, and any warranty on the repair.
How used prices compare with new Singer models
A used machine makes sense financially when it is tested, complete, and substantially cheaper than a new comparable model. At $100-$200, a well-functioning used Singer can offer strong value for basic home sewing. Between $250 and $350, buyers should compare its model, accessory package, and service history against discounted new machines that may include a return window.
New basic Singer machines can cost about $150-$300, while more feature-rich computerized models often fall around $300-$600. Prices vary with promotions and model availability. If the E99670 listing is actually for a specific discontinued machine, compare its features and parts support with current models rather than assuming the old list price reflects present value.
Buying a machine marked “for parts” is a different calculation. Such listings may cost $25-$100, but the buyer takes on uncertain repair expense and may have difficulty sourcing electronics or model-specific components. Unless the machine is being purchased for parts or repair experience, a tested unit usually offers a more predictable total cost.
Compare the used price plus likely service costs with the checkout price of a new alternative. A $175 used unit needing a $125 tune-up totals $300 before transportation, which may be close to the price of a new entry-level machine on sale.
Regional shipping and local listings affect the final price
Local private-party listings can be cheaper because the buyer avoids shipping and can test the machine in person. In large metro areas, used listings may be more plentiful, but prices can also run about 10%-20% above comparable rural listings when demand is strong. In smaller markets, a lower asking price may be offset by a longer drive or fewer repair shops.
Shipping a sewing machine commonly adds about $20-$60 for ordinary domestic delivery, and a larger boxed bundle may cost more. Poor packing can damage the case or alter machine alignment, so low-cost shipping is not necessarily the best option. Ask how the machine will be secured and whether the seller accepts responsibility for transit damage.
Retail pricing also changes with discounts. A sale may reduce a comparable new machine by 10%-25%, while seasonal promotions and retailer clearance can affect availability. These percentages are rough market comparisons, not guaranteed discounts for a particular E99670 listing.
Use the delivered price, including tax and shipping, when comparing online offers. For a local used purchase, include fuel and the cost of a shop inspection if the seller cannot demonstrate the machine.
Three realistic purchase totals for different E99670 listings
The examples below illustrate how condition and scope change the total. They are estimates for comparable Singer machines, not confirmed quotes for a verified E99670 model. A buyer should replace these assumptions with the seller’s exact model, accessories, tax rate, and repair estimate.
| Purchase scenario | Machine price | Added expense | Estimated total |
|---|---|---|---|
| Basic used unit, tested locally | $125 | $0 delivery; $25 inspection share | $150 |
| Complete used computerized machine | $225 | $35 shipping; $30 missing accessory | $290 before tax |
| New comparable computerized model | $425 | $20 delivery; about $35 tax | $480 |
In the first scenario, the unit is demonstrated stitching on fabric and includes a pedal and cord. The inspection amount assumes a modest shop check, not a full restoration. If the machine needs a tune-up instead, add approximately $75-$150, which can make the low advertised price less compelling.
The second scenario assumes a machine priced at $225 that lacks one accessory worth about $30 and requires $35 shipping. If the buyer later discovers a mechanical problem, a $150 repair would bring the total to roughly $440 before tax. The seller’s return policy therefore affects the risk as much as the stated price.
The new-machine example assumes a $425 sale price, modest delivery, and an illustrative tax amount. Local sales-tax rates differ. A retailer’s warranty and return terms may justify a higher upfront cost compared with a private sale, especially when the model identity or operating condition is uncertain.
Price each listing as a complete, usable purchase rather than a bare asking price. Include accessories, shipping, tax, inspection, and likely repairs in the comparison.
How to lower the Singer purchase price without costly surprises
Start by confirming the exact model and deciding which features are necessary. Paying extra for a large stitch library or accessories that will not be used can raise the budget without improving the intended work. For basic repairs and garment sewing, a tested mechanical model may cost less than a computerized machine with features the buyer does not need.
Ask private sellers to demonstrate straight stitch, zigzag, reverse, and the feed mechanism on a scrap of fabric. Confirm that the pedal, power cord, bobbin case, and any advertised feet are included. A short test can reveal issues that are not obvious in listing photos, while a model-label photo helps prevent mismatched accessory purchases.
Compare at least three quotes or listings using the same checklist: full model number, condition, included parts, shipping, returns, and service history. If a used unit needs repair, request a shop estimate before negotiating. A repair allowance based on a real quote is more useful than guessing from the seller’s description.
For a new purchase, check sale prices across retailers and calculate the checkout total. Avoid paying a premium solely for an old advertised list price or a claim that a model is rare. For a repair, set a limit—often around 50%-60% of the cost of a comparable new machine—then replace the machine if the estimate exceeds that limit and parts support is uncertain.
The most dependable savings come from verifying the model, testing operation, and comparing total ownership cost. A lower price is worthwhile only when the machine is complete enough for its intended use and repair needs are understood.