A SKIL 3386 band saw typically costs about $75-$150 used, while a complete, clean example may reach $175; new-old-stock listings can ask more. The final price depends on condition, included blade and fence, shipping, and whether the saw is the 3386-01 benchtop model.
Because this model is often found through resale listings rather than regular retail, asking prices can differ from completed-sale prices. For a working saw with ordinary wear, budgeting around $100-$125 before shipping is a practical starting point.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used SKIL 3386 saw | $75 | $115 | $175 | Working condition; price varies with accessories and wear |
| New-old-stock listing | $150 | $210 | $300 | Seller asking prices; verify completeness and return terms |
| Replacement blade | $12 | $20 | $35 | Typical blade price before shipping |
| Shipping or local delivery | $0 | $25 | $60 | Local pickup may avoid this charge |
| Ready-to-use purchase | $90 | $145 | $235 | Used saw plus a blade and typical delivery expense |
What a SKIL 3386 9-Inch Band Saw Usually Sells For
SKIL’s 3386-01 is a compact benchtop band saw with a 9-inch throat and a 2.5-amp motor. Used examples commonly fall around $75-$150, with roughly $115 a reasonable midpoint for a functioning unit that includes its table, fence, and basic components. A well-kept saw with a working blade can command more than a dusty, untested listing.
Prices over $175 are easier to justify when the machine is unusually clean, has useful accessories, or is sold locally with a clear demonstration. A seller asking $250-$300 for an ordinary used saw is not necessarily indicating its market value; compare the total with other compact saws and verify whether the listing is new-old-stock or simply overpriced.
Assumptions: U.S. resale market, standard 3386-01 configuration, ordinary cosmetic wear, and no major repair required.
Most buyers should compare the complete delivered price, not just the number in the listing title. A $90 local saw can be a better deal than a $75 listing with $45 shipping, especially if the local seller permits a test run.
How Blades, Fences, and Shipping Change the Checkout Total
A band saw’s purchase price is only one part of a usable setup. A used 3386 may include a blade that is dull, damaged, or unsuitable for the intended cuts. Confirm that the fence, miter gauge, table, blade guides, and blade-tension parts are present before treating the asking price as an all-in figure.
| Quote component | Typical price | What changes the charge | Budget note |
|---|---|---|---|
| Used saw body | $75-$150 | Condition, completeness, seller location | Ask for a powered test |
| Replacement blade | $12-$35 | Length, width, tooth pitch, brand | Check compatibility before ordering |
| Fence or miter accessory | $10-$35 | Included parts or replacement source | Missing accessories may be difficult to match |
| Shipping and packing | $25-$60 | Distance, carrier, protection for table | Oversize shipping can erase a low asking price |
| Sales tax | About $5-$25 | Tax rate and taxable checkout amount | Usually calculated by seller platform |
For labor, a typical consumer purchase does not require paid installation. If a repair shop is asked to inspect or service a used saw, its minimum charge may be roughly $50-$100, with additional work billed at about $60-$110 per hour.
Plan on about $90-$235 for a complete, ready-to-use used purchase. That range allows for a saw, one replacement blade when needed, and typical delivery or tax, but not a substantial motor or bearing repair.
Which 3386 Features and Condition Details Move the Offer
Condition drives resale value more than small cosmetic marks. A machine that starts smoothly, tracks its blade, and cuts without unusual vibration is worth more than an untested saw. Dented tables, cracked plastic, a missing fence, or a blade that repeatedly slips can reduce a reasonable offer by $15-$50 each, depending on the repair and availability of replacement parts.
Check the model label for 3386 or 3386-01 and compare the included parts with the listing. The saw’s 9-inch throat and roughly 3-1/2-inch maximum cutting capacity define its work envelope; a buyer who needs to resaw stock thicker than that should not pay a premium for this model. Its 2.5-amp motor is intended for light-duty work, not continuous heavy cutting.
Blade condition also matters. A blade with missing teeth, rust, or a kink may need immediate replacement, generally adding $12-$35. Ask the seller to show a cut in scrap material if possible. A brief powered test can reveal a motor that struggles, a blade that wanders, or a table that is loose.
Offer closer to $75-$100 for an untested or incomplete unit, and reserve $125-$175 for a clean, demonstrated saw with accessories. A higher price should come with a meaningful advantage, not just a polished listing description.
How Local Pickup and Online Listings Affect the 3386 Price
Local pickup often produces the lowest total because a compact machine can still be expensive to pack securely and ship. In many suburban and rural markets, a functional used 3386 may be listed around $75-$130. In large metro areas, greater demand and more active resale listings can push asking prices roughly 10%-20% higher, although local competition can also create bargains.
Online listings widen the selection but can add $25-$60 for shipping, plus tax. The seller’s asking price may also reflect the time and effort of packing a table saw-like machine, so a low base price does not guarantee a low delivered price. Check whether the listing offers returns, whether the power cord and fence are shown, and whether shipping insurance covers damage.
New-old-stock listings are especially variable. A boxed unit may be advertised for $150-$300, but an old retail price or unopened carton does not guarantee that the blade, tires, or other components are in usable condition. Ask about storage, proof of operation, and return rights before paying a premium.
For a local purchase, a testable saw around $100-$125 is often more compelling than a cheaper shipped listing with uncertain condition. Regional figures are guide ranges, not guaranteed sale prices; availability and seller urgency can change them substantially.
Three Realistic 3386 Buying Scenarios and Total Budgets
A low-cost local example might be a working saw listed at $80 with a worn blade. Add a $20 replacement blade and about $6 in tax, and the estimated total is $106. This is a sensible price if the motor runs evenly, the table is intact, and the blade tracks properly after adjustment.
A typical online purchase might cost $115 for the saw, $35 for shipping, $18 for a blade, and about $10 in tax. The delivered total is approximately $178. This is near the upper end of a normal used-tool budget, so the listing should include clear photos and confirmation that the fence and table are included.
A clean local unit with a usable blade and fence could sell for $150, with roughly $12 in sales tax and no shipping. Its estimated total is $162. Paying that amount can make sense when the buyer can inspect and test it, but it is less attractive if the saw is untested or missing parts.
Use the total-cost comparison: asking price + blade or missing parts + delivery + tax. The cheapest headline number may not be the lowest-cost option once the machine is ready to cut.
What Replacement Blades and Small Repairs Add to the Budget
Replacement blades for a compact saw typically cost $12-$35, depending on blade width, tooth count, material, and seller. Before ordering, confirm the required blade length and compatible width in the manual or on the machine. Do not assume a blade from another 9-inch saw will fit simply because the throat size is similar.
Small setup work can include cleaning the table, checking guide clearance, adjusting tracking, and confirming blade tension. These tasks usually cost nothing when done by the owner, though a shop inspection may start around $50-$100. If a technician finds a motor, bearing, switch, or wheel problem, labor and parts can quickly exceed the saw’s resale value.
A replacement blade is a normal expense; extensive repair is a different decision. If a repair estimate reaches $75-$125, compare it against the price of another working used saw and the cost of any missing accessories. Replacement parts may be harder to source for an older or discontinued model than for a current machine.
Keep a $20-$50 reserve for a blade and minor setup needs, but get a repair estimate before investing heavily in a questionable unit.
When a Used 3386 Beats a New Compact Band Saw
A used SKIL 3386 can be economical for occasional hobby work when it is complete, safe, and testable. At $75-$125, it may cost substantially less than a new compact band saw, particularly if the buyer already owns suitable blades and does not need a stand. At $150-$175, the price advantage narrows, and warranty coverage on a newer alternative may be worth comparing.
For frequent cutting, thicker stock, or a larger throat, compare the 3386 with current 10-inch or 14-inch saws rather than assuming the lowest purchase price is the best value. Larger machines can cost several hundred dollars or more, but they offer greater capacity and may be more appropriate for repeated work. Conversely, a jigsaw or coping saw may cost less for occasional small cuts, though neither duplicates the band saw’s controlled continuous blade path.
DIY repair is most sensible when the issue is simple, such as a dull blade or routine adjustment. Electrical problems, damaged wheels, or unstable tracking call for careful evaluation; operating a saw with a damaged blade or compromised guard is not a worthwhile way to save money.
Choose the 3386 based on its capacity and condition, not only its low used price. If the required cut exceeds about 3-1/2 inches in height or the work is heavy and frequent, a larger system may be the more economical purchase over time.
How to Lower the SKIL 3386 Price Without Buying a Problem
Set a maximum delivered budget before contacting sellers. For an ordinary working example, a target of $100-$125 before tax and a ceiling near $175 all-in can help prevent an attractive listing from becoming an overpriced purchase. Adjust that ceiling only when the saw is demonstrably clean, complete, or supplied with useful extras.
Ask for a short video showing startup, blade movement, and a test cut. Confirm that the fence, miter gauge, table, guard, and power cord are present. If the blade needs replacement, use the expected $12-$35 blade cost as a specific basis for negotiating rather than making a vague low offer.
Prefer local pickup when shipping is more than about $30, but inspect the saw before paying. Compare several listings and completed-sale information where available; stale asking prices are not proof that buyers are paying that amount. Avoid paying extra for accessories that are missing, incompatible, or unnecessary for the work planned.
The safest savings come from verifying operation and limiting add-ons, not skipping inspection. A modestly higher price for a complete, running saw can cost less than a bargain unit that needs parts, service, and separate delivery.