The Speed Queen AWN412SP111TW01 is an older top-load washer, so its price depends more on condition and availability than on a current retail list price. Buyers may find used units for about $150-$600, while a tested or refurbished machine can reach $400-$900; new-old-stock examples, when available, may cost $900-$1,500 before delivery.
Freight, installation, repair needs, and the age of the machine can change the final bill substantially. For most buyers, a complete used washer with delivery costs about $300-$800, while a repairable unit can be a false economy if major parts are worn.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used washer, uninstalled | $150 | $375 | $600 | Price depends on operation, age, and cosmetic condition |
| Tested or refurbished washer | $400 | $650 | $900 | Ask what was tested or replaced |
| New-old-stock unit | $900 | $1,200 | $1,500 | Availability and warranty vary |
| Delivery and installation | $75 | $175 | $350 | Local delivery; stairs or long carries may cost extra |
| Typical used purchase total | $250 | $550 | $950 | Washer plus basic delivery and hookup |
What Does a Speed Queen AWN412SP111TW01 Washer Cost?
This model is not a routinely stocked current retail washer, so its asking price is set by local sellers, appliance dealers, and the machine’s condition. A bare, untested unit often falls near $150-$300. A working machine with a clean cabinet and no obvious leaks commonly sells for $300-$600. A dealer-tested or refurbished example can be priced at $400-$900, depending on the work included.
These figures are estimates rather than a manufacturer’s current suggested retail price. The model’s age, local supply, and proof of operation matter more than a small difference in advertised features. For comparison, a current Speed Queen TC5-class top-loader may retail for roughly $1,300-$1,700 before delivery and installation, though dealer pricing and regional availability vary.
Assumptions: U.S. private-party and appliance-dealer listings, standard residential access, and no major repair included.
Budget around $500-$800 for a sound used AWN412SP111TW01 delivered and connected, and verify operation before paying a premium.
How Parts, Delivery, and Installation Shape the Quote
A low advertised price may not include delivery, hookup, removal of the old machine, or any repair work. A local seller who loads the washer may charge less than an appliance dealer that tests it and provides delivery. Request an itemized quote, especially if the unit is upstairs or the route from the truck includes narrow doors or several steps.
| Quote item | Low | Typical | High | What changes the charge |
|---|---|---|---|---|
| Washer price | $150 | $375 | $900 | Untested, working, or refurbished condition |
| Local delivery | $50 | $100 | $200 | Distance, stairs, and carry-in |
| Basic installation | $25 | $75 | $150 | Existing hoses and compatible hookups |
| Old washer removal | $0 | $40 | $100 | Haul-away availability and disposal rules |
| Common hose replacement | $20 | $45 | $90 | Hose type and installer labor |
Basic installation typically means placing and leveling the appliance, connecting existing water lines and drain, and checking for leaks. It usually does not cover plumbing changes, a new shutoff valve, electrical work, or fixing a damaged floor. A delivery crew may decline hookup if valves are corroded or the drain arrangement is unsuitable.
Typical installation labor: 0.5-1.5 hours at about $75-$125 per hour, when billed separately.
Confirm the delivered total, not just the machine price, and ask whether removal and a basic leak test are included.
Why Age, Condition, and Capacity Change the Price
Age and service history are major pricing signals for this older model. A clean cabinet alone does not prove that the washer works properly. Ask to see a complete wash and spin cycle, listen for unusual bearing or motor noise, and inspect beneath the machine for water or oil. A seller who cannot demonstrate operation should price the washer as untested, not as ready to install.
AWN412-family descriptions commonly identify a traditional top-load washer with a capacity around 3.3 cubic feet; verify the exact specification on the machine’s label or documentation. Capacity affects the comparison with newer washers, but condition and repairability determine whether this particular unit is worth buying. A missing model or serial tag makes it harder to confirm parts and service history.
Age-related wear can make an apparently inexpensive machine costly. A drain or fill issue may be a modest repair, while a failed transmission, motor, tub, or control component can take the total beyond the value of the washer. Before agreeing to a repair price, ask the technician to identify the failed part and state whether the part is available for this exact model.
A non-running unit at $150-$250 is only a bargain if the fault is diagnosed and the repair quote is reasonable. For a washer needing a major repair estimated at $400 or more, compare the repair-plus-purchase total with a tested replacement and its warranty.
Used, Refurbished, or Current Speed Queen TC5?
A used AWN412SP111TW01 can have the lowest entry price, but it typically carries more uncertainty and may have limited or no seller warranty. A refurbished machine costs more because a dealer may test, clean, or replace components. Those terms are not standardized: one seller may mean a basic operational check, while another may provide a written parts-and-labor warranty.
| Choice | Typical washer price | Likely extra charges | Price trade-off |
|---|---|---|---|
| Private-sale AWN412SP111TW01 | $150-$600 | $75-$300 delivery and setup | Lowest cost, often little recourse |
| Dealer-tested AWN412SP111TW01 | $400-$900 | $75-$250 delivery or removal | Higher price, ask for test and warranty details |
| Current Speed Queen TC5-class washer | $1,300-$1,700 | $100-$350 delivery and setup | Higher upfront spend, current warranty terms |
The current TC5 is a comparison point, not an identical substitute. It is a contemporary product with a current parts and warranty framework, while the older AWN412SP111TW01’s support depends on exact parts availability. For a household seeking a lower upfront bill, the older model may be suitable if its condition is documented. For a buyer who values warranty coverage and predictable servicing, include those benefits in the price comparison.
Compare final installed prices and warranty terms, not just the sticker prices of an old washer and a new one.
What Local Repair Calls Usually Add
Buying an older washer without a demonstration may require a service call before it can be trusted. A diagnostic visit commonly costs $75-$150, sometimes credited toward approved work. General appliance labor often runs $75-$125 per hour, with a minimum charge of one hour or a flat service fee. Parts are additional and can be difficult to source for an older model.
Simple service, such as clearing a drain obstruction or replacing a readily available hose, may total about $100-$250 including labor. A fill-valve or pump repair may land around $150-$350, depending on part cost and access. More involved motor, transmission, or tub work can exceed $400-$700 and may not be economical unless the washer is otherwise in excellent condition and the part is confirmed available.
Ask whether the estimate includes diagnosis, parts, labor, and a return visit if a part must be ordered. A quote that excludes parts may look less expensive than the actual repair. If the appliance is already at the home, moving it to a shop can add another $50-$150 or more.
Set a repair ceiling before authorizing work; for an uncertain used washer, a $300-$400 major repair often weakens the value of the purchase.
How Long Delivery and Washer Installation Take
A straightforward local delivery and hookup usually takes one to two hours on site, including moving the washer into place, connecting existing lines, leveling it, and checking for leaks. A seller may charge a flat $75-$200 for delivery, while a separate installer may charge $75-$125 per hour with a minimum visit fee. Rates are higher when the work is scheduled through a dealer or requires a second person.
Extra handling changes the quote. Stairs, a long distance from the truck, tight turns, or removal of a heavy old appliance can add roughly $25-$100 per condition. A delivery route beyond the seller’s normal service area may add a mileage charge or a minimum delivery fee. Confirm whether the price covers carrying the washer inside, not only curbside drop-off.
Installation assumes a suitable water supply, drain, and grounded outlet already exist. A plumber may charge roughly $150-$350 to replace shutoff valves or correct a basic plumbing issue; more extensive work costs extra. Appliance installation does not include unrelated electrical or plumbing upgrades.
Send the seller the delivery address, floor level, stair count, and access details before accepting a quote.
Regional Quotes and Rural Delivery Fees
Prices for this model are especially local because used inventory is limited and private sellers usually do not ship appliances. In large metro areas, the number of listings may keep basic used asking prices near $200-$500, but labor and delivery can be 10%-25% above smaller-market rates. In rural areas, the washer itself may be listed for less, yet a long delivery route can erase that difference.
As a budgeting adjustment, allow roughly 5%-15% above a local baseline in high-cost coastal metros, and about 10%-25% extra for delivery when a seller must travel well outside its usual area. These are planning ranges, not fixed regional tariffs. The actual difference depends on seller inventory, distance, stairs, and whether a local appliance company handles the move.
Shipping a single washer across state lines is rarely economical. Freight, crating, and residential delivery can add several hundred dollars, and freight service may not include indoor placement or connection. A nearby machine with a verifiable test can be a better value even if its asking price is higher.
Compare at least two local delivered quotes and treat long-distance transport as a separate purchase decision.
How to Lower the Price Without Buying the Wrong Washer
Ask the seller to demonstrate a full fill, agitation, drain, and spin sequence. A short test does not guarantee long-term reliability, but it can reveal leaks, weak draining, excessive noise, or a washer that never reaches spin. If the seller cannot test it, negotiate from an untested-appliance price and keep money aside for diagnosis.
Control delivery costs by measuring the doorway, laundry-room opening, and route in advance. Use existing compatible hoses only if they are in good condition; do not reuse a cracked hose simply to avoid a small expense. If the old appliance is already disconnected and accessible, ask whether self-removal or curbside pickup reduces the haul-away fee.
Get written details on the model number, included parts, delivery, installation, and warranty. Compare a private seller’s lower price with a dealer’s tested unit only after adding likely delivery and repair expenses. Avoid paying extra for a vague “refurbished” label unless the seller lists the work performed and the warranty period.
Consider the current replacement price if a used unit needs significant work. For example, a $350 washer plus $175 delivery and a $300 repair reaches $825 before future service. That may still be cheaper than a new model, but the remaining difference should be weighed against warranty coverage and expected service life.
The most dependable savings come from verifying function, negotiating a complete delivered price, and declining repairs that approach the cost of a more supportable replacement.