Speed Queen appliances typically cost $1,200-$2,700 per washer or dryer, while a matched washer-and-dryer pair commonly runs $2,500-$4,500 before delivery and installation. Model type, dealer pricing, location, hookups, and haul-away service have the biggest effect on the final quote.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Top-load washer | $1,200 | $1,500 | $1,900 | Price varies by series and options |
| Front-load washer | $1,900 | $2,300 | $2,800 | Residential front-load models |
| Electric or gas dryer | $1,100 | $1,500 | $2,000 | Gas models may need a gas hookup |
| Washer-and-dryer pair | $2,500 | $3,300 | $4,500 | Appliances only, before delivery or installation |
| Stacked laundry unit | $3,000 | $3,700 | $4,500 | Price depends on configuration and dealer |
What a Speed Queen washer and dryer cost
For a standard residential top-load washer, budget about $1,200-$1,900, with many configurations landing near $1,500. A residential front-load washer is generally $1,900-$2,800. Standalone dryers commonly cost $1,100-$2,000, depending on model, fuel type, and dealer quote.
A matched top-load washer and dryer often totals $2,500-$3,800 before delivery, installation, tax, or removal of old appliances. A front-load pair or higher-feature combination can reach $3,500-$4,500 or more. These are practical retail estimates, not a single nationwide fixed price list; Speed Queen products are sold through dealers, and local inventory and promotions affect quotes.
For a typical pair, set aside roughly $3,000-$4,000 for the appliances and keep delivery and hookup charges separate.
Assumptions: U.S. residential models, standard colors, ordinary dealer availability, and no major electrical, plumbing, or vent changes.
How TR, TC, FF, and DR models differ in price
Speed Queen’s model codes help narrow down a quote, but dealer listings and configurations can differ. TR models are top-load washers, with features and pricing varying by series. TC models are also top-load washers and may carry a higher price depending on the specific configuration. FF identifies a front-load washer; DR identifies a dryer. Confirm the full model number, included accessories, and warranty terms before comparing prices.
As a broad comparison, entry-level or simpler top-load configurations tend to fall near $1,200-$1,500, while feature-rich top-load models may be $1,500-$1,900. Front-load machines often begin around $1,900 and can reach $2,800. Dryer quotes commonly range from $1,100-$1,600 for standard configurations and $1,600-$2,000 for higher-priced models or packages.
Stacked laundry products are a separate purchase category, not simply the price of a washer plus a dryer. Budget about $3,000-$4,500 for the unit, and verify the required closet dimensions, venting, electrical service, and installation arrangement.
Compare full model numbers and included features rather than relying on a series name alone.
What delivery, hookups, and removal add to the quote
The appliance price may not include delivery, installation, or hauling away the old unit. Basic delivery and placement can add roughly $75-$200 per order; standard washer or dryer hookup may add $50-$150 per appliance. Old-appliance removal commonly costs $25-$75 per unit, although some dealers include it with a purchase.
Extra charges can apply when stairs, a long carry, tight access, or a second delivery attempt requires additional labor. A new gas line, dryer vent, water valve, or electrical circuit is generally not part of a basic hookup. Depending on the repair or installation scope, allow $150-$600 or more for trade work. Ask the dealer whether the quote includes hoses, a power cord, a vent connector, stacking hardware, and tax.
A delivered and connected pair can add about $150-$500 to appliance pricing before unusual site work.
| Quote item | Typical price | What changes it |
|---|---|---|
| Delivery and placement | $75-$200 per order | Distance, stairs, and access |
| Standard hookup | $50-$150 per appliance | Existing connections and included parts |
| Old-unit removal | $25-$75 per appliance | Dealer policy and pickup conditions |
| New vent, valve, or gas work | $150-$600+ | Parts, code requirements, and labor |
Which capacity and hookup details change the price
Capacity and configuration can move a Speed Queen quote by several hundred dollars. A standard top-load model with ordinary residential capacity usually costs less than a higher-priced series or a front-load washer. Compare stated capacity and cycle features only after confirming the model number; a similar-looking machine may have a different control package or warranty.
Installation conditions can matter as much as appliance specifications. If the dryer needs a gas connection rather than an existing compatible hookup, or the vent run must be extended, the total can increase by $150-$600 or more. A vent run longer than about 25 feet, multiple elbows, or a route through a difficult wall may require a different setup and additional labor. Follow the appliance manual and local code for vent and clearance requirements.
Stacking also changes the budget. A stacked product or approved stacking arrangement needs suitable dimensions and compatible components; a separate kit may add roughly $50-$150 when it is not included. Tight closets can trigger carpentry, door, or vent adjustments, so measure width, depth, height, and door clearance before ordering.
Measure the laundry space and check existing hookups before treating an advertised appliance price as the project total.
How many labor hours does Speed Queen installation take
Replacing a washer and dryer with similar units and service connections commonly takes about 1-2 hours for delivery and basic installation. A technician or installer may charge $75-$150 per hour, often with a minimum service fee. Some dealers bundle labor into a flat installation charge instead, so compare the total rather than assuming an hourly rate applies.
More involved work takes longer. A new vent route, gas connection, water shutoff replacement, or electrical change may require a separate licensed trade and roughly 2-6 hours of work, with charges often reaching $150-$600 or more. The installer may decline work outside the dealer’s scope, requiring a separate contractor. Confirm who is responsible for testing the washer, leveling the units, checking for leaks, and connecting the dryer exhaust.
Simple replacement is usually the least expensive installation; altered hookups and venting drive labor upward.
Regional dealer quotes vary across the United States
Local labor, shipping distance, sales tax, and dealer competition affect Speed Queen prices. As a planning estimate, appliance quotes in high-cost coastal metro areas may run about 5%-15% above a typical national retail estimate. Smaller cities and rural areas may be near the midpoint or 5%-10% higher when delivery routes are long or dealer inventory is limited.
These differences are not guaranteed discounts or surcharges. A rural buyer might receive a lower appliance quote but pay more for delivery, while a large metro dealer may discount a package but charge separately for installation. State and local sales tax can add roughly 0%-10% depending on jurisdiction, and it is generally calculated on taxable items and services under local rules.
Request an itemized quote from at least two authorized or established local sellers. Compare the same model numbers, delivery distance, installation scope, haul-away, tax, and warranty coverage. A quote that appears $200 lower may not be cheaper after omitted hookups or delivery fees are added.
Compare the delivered, installed total in the buyer’s ZIP code, not just the advertised appliance price.
Three realistic Speed Queen purchase totals
A basic top-load replacement could include a washer at $1,350 and a dryer at $1,250. Add $150 for delivery, $100 for standard hookups, and $50 for removing the old units. The estimated subtotal is $2,900 before tax, assuming existing connections are usable and no extra labor is needed.
A midrange top-load pair might price at $1,550 for the washer and $1,500 for the dryer. With $175 delivery, $125 installation, and $60 haul-away, the subtotal is about $3,410 before tax. This scenario assumes a normal two-appliance replacement with standard access.
A front-load pair priced at $2,300 for the washer and $1,650 for the dryer could total $4,300 after $200 delivery, $100 basic installation, and $50 removal. A new vent or electrical work would be additional. These examples are budgeting scenarios, not guaranteed model-specific dealer offers.
Installation details can make two similar appliance quotes differ by hundreds of dollars.
Where buyers can trim a Speed Queen laundry budget
Start by comparing the same model numbers across itemized dealer quotes. Ask whether a package price is lower than buying the washer and dryer separately, and check whether the bundle includes delivery or installation. A modest package discount can be useful, but it should be compared against the dealer’s full fees and return terms.
Keep the scope simple when existing hookups are safe and compatible. Measure the route from the entry to the laundry space, clear the path, and confirm doorway dimensions before delivery to avoid access surcharges or a failed delivery. Retain usable venting and connections only when they meet the appliance instructions and local requirements; unsafe or outdated components should not be kept just to save money.
Choose features based on actual use rather than assuming the highest-priced model is necessary. Ask about floor models, open-box units, or current dealer promotions, and confirm the warranty and condition in writing. If one existing appliance is in good condition, replacing only the failed unit can reduce the immediate bill, although matching age and performance may matter when planning a later replacement.
The most reliable savings come from comparing complete quotes and avoiding unnecessary site changes or accessories.