A Sub-Zero 695 price depends on whether the unit is used, refurbished, or replaced with a current 48-inch built-in refrigerator. Buyers commonly pay about $2,000-$5,500 for a used 695, while a professionally refurbished unit may cost $4,000-$8,000; delivery, installation, and repairs can add substantially. The model’s age, condition, local availability, and the cost of servicing its built-in components are the main price drivers.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Used Sub-Zero 695 | $1,500 | $3,500 | $5,500 | Working unit; condition and seller support vary |
| Refurbished Sub-Zero 695 | $4,000 | $6,000 | $8,000 | Price depends on parts replaced and warranty |
| Delivery and installation | $500 | $1,100 | $2,500 | Access, cabinetry, and connection work affect fees |
| Current 48-inch built-in replacement | $12,000 | $16,000 | $22,000 | Appliance only; model and finish affect price |
What buyers pay for a Sub-Zero 695 today
The 695 is a legacy 48-inch built-in side-by-side refrigerator-freezer, so its present-day price is primarily a used-market price rather than a standard new-retail price. A functioning unit commonly lists for $1,500-$5,500, with roughly $3,500 a practical midpoint before transport, installation, or repairs. Asking prices are not guaranteed sale prices, and a low listing may reflect an untested appliance, local pickup, or a known service issue.
Refurbished units generally cost more because a dealer may test the appliance, replace selected components, and provide limited coverage. Expect about $4,000-$8,000 for a refurbished 695, depending on what work was performed and whether delivery is included. Budget for the appliance and the work needed to put it into service, not just the listing price.
For comparison, a current 48-inch built-in replacement can run about $12,000-$22,000 for the appliance alone. This is a broad category estimate, not a direct model-to-model quote; brand, configuration, finish, and dealer discounts change the price. Assumptions: U.S. used-market examples, standard 48-inch opening, and no major cabinetry reconstruction.
How appliance, labor, and delivery shape the quote
A used-unit quote can leave out costs that make a large built-in refrigerator expensive to move and connect. Ask sellers and installers to identify which charges are included, especially for removal of the old appliance, stairs, tight turns, water-line work, and adjustments to the surrounding panels. A written quote should distinguish the unit price from installation and any service work.
| Quote component | Typical range | What changes the charge | Common billing basis |
|---|---|---|---|
| Used appliance | $1,500-$5,500 | Operation, cosmetic condition, seller location | Per unit |
| Refurbishment or inspection | $250-$1,200 | Testing depth and replaced parts | Per unit or service visit |
| Delivery and placement | $250-$900 | Distance, stairs, crew, access | Per delivery |
| Installation and connection | $300-$1,000 | Water line, leveling, panels, site conditions | Per installation |
| Old-unit removal | $100-$400 | Haul distance and disposal arrangements | Per appliance |
| Repair allowance | $300-$2,000+ | Diagnosis, parts availability, repair scope | Service call plus parts and labor |
Labor rates for appliance service often fall around $100-$200 per hour, while a diagnostic visit may cost $100-$250 before repairs. Built-in installation is commonly quoted as a job rather than a simple hourly task. If a quote includes several hours of carpentry or electrical work, request the task list and confirm whether those trades are included in the installer’s price.
Delivery access and repair condition can add more to the total than small differences in the appliance’s sale price. Assumptions: U.S. metro-area service rates, ordinary access, and no structural or electrical upgrades.
Which 48-inch dimensions and appliance conditions change price?
The 695’s 48-inch width limits the pool of replacement choices and makes exact fit important. Measure the opening, depth, height, door swing, and surrounding panels before paying a deposit. A nominally similar refrigerator may still need different trim or cabinet adjustments. If the opening is not close to the required dimensions, installation or carpentry can add hundreds to several thousand dollars.
Condition makes an even larger difference in used pricing. A seller who can demonstrate stable cooling in both compartments and provide recent service records may command more than a seller offering an untested unit. A refrigerator with a compressor, sealed-system, control, or cooling problem can need a $500-$2,000 repair, and extensive failures can make the unit uneconomical to buy.
Age also affects the value of any warranty promise. Ask for the serial number and service history, and have a qualified technician inspect a high-priced unit before purchase if the seller permits it. Confirm what the refurbished warranty covers, how long it lasts, and whether labor, parts, and travel are included. Paying a premium is easier to justify when inspection and written coverage reduce the risk of hidden repair costs.
How much more do delivery and built-in installation add?
Moving a 48-inch built-in is not the same as delivering a freestanding refrigerator. The appliance is heavy, may be secured in cabinetry, and can require careful handling to protect floors, doors, panels, and nearby counters. Local delivery and placement may cost $250-$900; a more involved installation with reconnection and leveling commonly totals $300-$1,000, before unusual carpentry or repairs.
Complex access can push delivery toward $1,000 or more. Narrow hallways, multiple flights of stairs, elevator restrictions, long carries, or a need to remove a door can require extra labor or specialized equipment. Ask whether the delivery team will move the appliance through the full route, install it in the opening, and reconnect the water supply, rather than assuming a curbside or threshold delivery includes those tasks.
Removal of the old unit usually adds $100-$400, although some sellers include basic haul-away. New water-line work, cabinet changes, or flooring repair are separate possibilities. Assumptions: existing 48-inch opening is usable, electrical and water connections are suitable, and the route has no major obstacle. Get an on-site access check when the route or cabinetry is uncertain.
Regional used-market prices vary with local supply
Prices for an older Sub-Zero vary because large built-ins are costly to transport and are often sold locally. In major metro areas with more luxury-kitchen turnover and appliance dealers, listings may be roughly 10%-20% above the national midpoint. In smaller markets, a seller may accept a lower price, but the buyer may face higher delivery charges or fewer technicians familiar with older built-in models.
These are directional differences, not fixed regional rates. A $3,500 used listing in a nearby city may be a better overall deal than a $2,800 listing several hundred miles away once transport and inspection are included. Conversely, a dealer offering local delivery and written service coverage may justify a higher asking price. Request an all-in quote delivered to the home, not just the advertised unit price.
Service availability matters as much as purchase availability. Before buying, contact a local appliance technician to confirm that the model can be serviced and that relevant parts can be sourced. Travel charges for remote locations can add $50-$200 or more to a service visit. Compare delivered, inspected prices within a realistic service radius.
Repairing a 695 versus replacing the built-in unit
A repair can make sense when the refrigerator is otherwise dependable and the diagnosis identifies a limited problem. A service call and modest repair may total $300-$800; a major component or sealed-system job can reach $1,000-$2,500 or more. Obtain a written diagnosis and ask whether the estimate includes parts, labor, refrigerant work if needed, and a repair warranty.
Replacement becomes more compelling when several costly failures occur together, parts are difficult to obtain, or the cabinet opening can accept a newer model without extensive changes. A new 48-inch built-in appliance commonly costs $12,000-$22,000 before delivery and installation, so replacement is a much larger immediate outlay. However, buying an inexpensive used 695 with an uncertain cooling history can create repeat service expenses that narrow the gap.
For a simple comparison, add the used purchase price, inspection, delivery, installation, and a realistic repair reserve. Compare that total with the installed price of a replacement and the available warranty. Do not treat a low used price as proof that the older unit is the lower-cost option over time.
Three realistic budgets for buying a Sub-Zero 695
A local pickup deal may cost $1,500-$2,500 for an operating unit sold without installation coverage. A buyer might add $200-$400 for inspection, $300-$700 for delivery, and $300-$700 for installation, resulting in a rough total of $2,300-$4,300 before repairs. This scenario assumes a nearby seller, straightforward access, and a unit that passes inspection.
A dealer-refurbished purchase might be listed at $5,000-$7,000, with delivery and installation bringing the total to about $5,600-$8,900. The value depends on documented work and warranty terms, not the word “refurbished” alone. Ask for an itemized list of replaced components and testing performed, along with the warranty’s duration and exclusions.
A current replacement may start around $12,000 for the appliance and reach $16,000-$22,000 or more for higher-priced models. Delivery, installation, removal, and cabinet modifications can add roughly $1,000-$4,000, depending on scope. Example totals assume ordinary access and exclude major remodeling. Compare complete installed totals on the same basis before choosing between used and new.
Ways to control the 695 purchase price and avoid extras
Ask for the model and serial information, a cooling demonstration, recent service records, and an itemized condition report before agreeing on price. If a seller cannot verify operation, price the unit as a repair risk rather than assuming it works. A pre-purchase inspection can identify problems while there is still time to negotiate or walk away.
Compare at least two delivery and installation quotes, with the same scope specified in each. Confirm whether the price includes moving the refrigerator into the opening, leveling, reconnecting the water line, handling panels, and removing the old appliance. Share access photos and measurements in advance to reduce surprise fees. If the home needs cabinet work, obtain a separate estimate before committing to the appliance.
Choose a unit with a finish and configuration that suit the existing kitchen rather than paying extra for cosmetic features that do not improve fit or operation. Avoid paying a large premium for a vague refurbishment claim; request written evidence of work and coverage. The most controllable savings come from verifying condition, limiting scope changes, and comparing all-in quotes.