A Sutech Stealth 33 price is generally quote-based, so buyers should treat online figures as estimates rather than a fixed manufacturer list price. For budgeting, allow about $70,000-$140,000 for a new machine before freight and installation, with used units often around $25,000-$80,000 depending on age, configuration, condition, and included tooling.
The final quote depends on the machine’s exact specifications, spindle and tool-changing package, controls, delivery distance, electrical work, and operator training. The ranges below are planning estimates for a U.S. purchase, not a confirmed Sutech offer.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| New Stealth 33 machine | $70,000 | $105,000 | $140,000 | Estimated base-to-equipped machine pricing; verify configuration with the seller. |
| Used Stealth 33 machine | $25,000 | $50,000 | $80,000 | Condition, service history, age, and accessories drive the spread. |
| Freight and rigging | $2,000 | $5,000 | $12,000 | Depends on distance, access, unloading, and placement. |
| Installation and training | $1,500 | $4,000 | $8,000 | May be quoted separately or bundled with purchase. |
| Typical new-machine delivered budget | $75,000 | $114,000 | $160,000 | Excludes major building work and applicable sales tax. |
What a Sutech Stealth 33 usually costs
A practical planning range for a new Sutech Stealth 33 is $70,000-$140,000 for the machine itself. A common midrange budget is about $105,000 before freight, rigging, installation, tooling, and tax. The estimate assumes an industrial CNC woodworking machine with a standard configuration, rather than a heavily customized production cell.
Budget roughly $75,000-$160,000 for a new machine delivered and put into service. The upper end reflects added equipment, long-distance transport, more involved setup, and site preparation. Buyers should ask whether the quote covers the machine only or includes delivery, commissioning, training, and warranty support.
Used-machine prices are harder to compare. A functioning unit might be listed around $25,000-$80,000, but a low asking price can exclude expensive items such as a working vacuum pump, controller support, tooling, or freight. A machine with documented maintenance and a successful test cut may justify a higher price than an older unit sold as-is.
Assumptions: U.S. industrial equipment pricing, standard configuration, ordinary access, and no major building or electrical upgrades. The manufacturer or distributor must confirm the exact model, specifications, and current quote.
How spindle, controls, and delivery shape the quote
The machine price is only one part of the purchase. Buyers should request an itemized quote that separates the machine, optional equipment, labor, and delivery. This makes it easier to compare offers when one supplier bundles setup or tooling and another lists those items separately.
| Quote component | Typical range | What changes the amount | Pricing basis |
|---|---|---|---|
| Machine and standard package | $70,000-$140,000 | Work envelope, spindle, control, table, and package contents | Per machine |
| Tooling and accessories | $1,000-$8,000 | Tool holders, cutters, vacuum components, and workholding | Per package |
| Freight and delivery | $1,500-$7,000 | Origin, mileage, carrier, and shipment requirements | Per shipment |
| Rigging and placement | $500-$5,000 | Forklift or crane needs, doorway clearance, and travel distance | Per job |
| Installation and training | $1,500-$8,000 | Technician time, travel, setup scope, and training days | Per visit or package |
| Electrical and dust collection work | $1,000-$12,000 | Existing service capacity, wiring distance, and duct changes | Per site |
A spindle upgrade, automatic tool changer, enhanced vacuum system, or specialized control package can add thousands of dollars, depending on what the model supports and what is included as standard. Accessories that appear modest individually can also raise the final invoice when several are added together.
Delivery costs depend on the shipment’s origin and the receiving site. A truck may deliver to a loading dock, but moving the machine into a shop, leveling it, and setting it in place can be separate charges. Confirm in writing whether the quoted price includes unloading, rigging, commissioning, and operator instruction.
Which Stealth 33 specifications change the price most
Configuration is the largest controllable price variable. Before comparing quotes, confirm the machine’s usable working area, spindle rating, tool-changing arrangement, control system, and vacuum or clamping package. Two machines carrying the same model name may not have identical options or included accessories.
For a woodworking CNC, a spindle in the roughly 7.5-10 HP class can serve different workloads than a higher-output spindle intended for demanding production. A machine with an automatic tool changer can cost more than a manual-tool setup, but may reduce tool-change downtime on jobs that use several cutters. Ask the seller to state the spindle power, tool capacity, and exact table dimensions on the quote.
Workpiece size matters because the machine must accommodate the largest panels or components. A shop processing standard 4-by-8-foot sheet goods has different requirements from one handling longer panels or larger fixtures. Verify both the advertised bed size and usable cutting area; clamps, tool paths, and safety clearances can reduce the space available for a job.
Site conditions can add substantial expense. A long cable run, inadequate electrical service, limited doorway clearance, uneven flooring, or the need for new dust-collection ductwork can push preparation from a few hundred dollars into several thousand. Check electrical requirements and delivery access before signing a purchase order.
Three purchase budgets for different shop situations
These examples illustrate how a quote can vary. They are not confirmed Sutech offers and assume the seller verifies the machine configuration and condition before purchase.
| Scenario | Machine and scope | Estimated total | Important assumption |
|---|---|---|---|
| Used entry purchase | Used machine at $35,000, $2,500 freight, $2,000 setup, $1,500 tooling | $41,000 | Working unit, limited accessories, no major repairs |
| New standard setup | Machine at $100,000, $4,000 freight, $3,500 installation, $3,000 tooling | $110,500 | Standard package and prepared shop floor |
| New equipped installation | Machine at $130,000, $7,000 freight and rigging, $7,000 setup, $8,000 site work and options | $152,000 | Higher-spec package and moderate facility changes |
In the used example, the apparent savings can disappear if the machine needs a controller repair, spindle service, or replacement vacuum components. A buyer should reserve a repair allowance rather than spending the full budget on the purchase price. A qualified inspection and test cut can help identify condition issues before payment.
For a new installation, request a written list of included components and services. Ask whether taxes, software, initial tooling, freight insurance, and travel expenses are included. For separately billed technician work, planning rates of about $100-$200 per hour plus travel are reasonable estimates, but supplier rates vary.
How much setup time and shop labor to budget
Machine delivery and installation may take one to three days when the site is ready and the job involves standard placement, leveling, connection, and basic commissioning. More complex electrical work, control integration, dust collection, or operator training can extend the schedule. The seller should provide a scope and expected technician days rather than a vague setup allowance.
Rigging may require a forklift or crane, particularly if the machine cannot pass through a standard doorway or the receiving area has limited access. Basic rigging can cost about $500-$1,500; difficult placement or specialized lifting can reach $3,000-$5,000 or more. These charges are site-specific, so buyers should provide doorway widths, floor plans, and unloading details when requesting a quote.
Shop preparation can include a level, stable floor; appropriate electrical service; compressed air if required by the configuration; and dust collection sized for the machine. Depending on existing infrastructure, basic electrical work may cost $1,000-$4,000, while a new circuit or longer run can exceed $5,000. Dust-collection changes can add roughly $500-$4,000.
Getting the site ready before delivery can avoid paid waiting time and repeat technician visits. Confirm responsibility for wiring, anchoring, utility connections, and disposal of packing materials. If the machine arrives before the shop is prepared, storage or rescheduling charges may apply.
New versus used Stealth 33 pricing and risk
A used unit may save $30,000-$80,000 compared with a new configured machine, but asking prices do not reflect the full cost of bringing equipment into production. Age, hours, maintenance records, software or controller availability, and the condition of the spindle and vacuum system all affect value.
Before buying used, request the serial number, service records, current photos, and a live demonstration cutting material similar to the buyer’s work. Check axis movement, homing accuracy, spindle noise, tool changes, vacuum performance, and control alarms. A pre-purchase inspection may cost $500-$2,000 plus travel; it can be worthwhile when the purchase is tens of thousands of dollars.
New equipment typically costs more upfront but may include a manufacturer or dealer warranty, commissioning, and access to parts or technical support. Warranty terms vary, so ask which components are covered, how travel is handled, and whether labor is included. For used equipment, verify that software licenses and control support can transfer to the new owner.
Compare the total cost of ownership rather than the listed price. A used machine priced at $40,000 could require $8,000 in repairs and setup, while a new $100,000 machine may include service and training. The lower purchase price is not necessarily the lower cost of starting production.
Regional freight, taxes, and installation differences
Machine pricing may be similar across regions when the same supplier sells the same configuration, but delivered costs are not uniform. Buyers near a distributor or service technician may pay less for travel and freight than shops several states away. Rural delivery, limited carrier access, and unusual unloading requirements can increase the total.
As a planning allowance, freight and setup combined may be 5%-10% of the machine price for a straightforward nearby installation. A distant shipment or difficult site can raise that share to 10%-15% or more. These percentages are budgeting guides, not standard charges; obtain a location-specific quote using the delivery address and access details.
Sales tax depends on the state and the buyer’s eligibility for manufacturing equipment exemptions. Some states offer exemptions or credits for qualifying production machinery, while documentation and use requirements vary. Buyers should confirm tax treatment with a state tax professional or the relevant agency before assuming a quote is tax-free.
Ask suppliers to distinguish freight, rigging, travel, lodging, and on-site labor. Comparing those line items helps reveal whether a low equipment quote is offset by higher delivery or commissioning charges. Use delivered, installed totals when comparing dealers, not machine-only prices.
Where buyers can trim the Sutech 33 budget
Start by matching the configuration to actual work. A shop that primarily cuts nested sheet goods may not need every automation option, spindle upgrade, or accessory package offered. Ask the supplier to price a standard configuration and each upgrade separately so the cost of added capability is visible.
Prepare the site before scheduling delivery. Confirm electrical capacity, doorway clearance, floor condition, dust collection, and unloading equipment. Completing this work in advance can prevent rescheduling and extra technician travel. If the shop already has suitable tooling or workholding, ask whether those items can be removed from the package rather than paying for duplicates.
Compare at least three itemized offers, including one used-machine option if its condition can be verified. Keep the machine specification consistent across quotes: bed size, spindle, tool changer, control, vacuum package, warranty, and installation scope. A lower quote may omit commissioning or have different equipment, so compare equivalent totals.
Timing can also matter. Avoiding an urgent delivery request and allowing flexibility for shipping may reduce premiums, although equipment lead times and freight availability vary. Negotiate bundled installation or training only after confirming the individual prices. Preserve safety, service access, and required production capacity; cut optional features before cutting essential setup work.
For a final budget, request a written quote that names the exact Stealth 33 configuration, lists included accessories, states warranty terms, and separates taxes and delivery. The most useful estimate is a delivered-and-installed total tied to the buyer’s site, not an unverified online asking price.