Thompson Price Kitchen and Bath does not have a publicly verified price list available here, so its exact charges should be confirmed with a written estimate. For U.S. planning, a midrange kitchen remodel commonly runs $25,000-$60,000 and a full bathroom remodel $12,000-$30,000; room size, cabinet and fixture choices, labor rates, and plumbing or electrical changes drive the final price.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Small kitchen refresh | $8,000 | $18,000 | $30,000 | Cabinet refinishing or stock cabinets, limited layout changes |
| Midrange kitchen remodel | $25,000 | $42,000 | $60,000 | Typical 150-200 sq ft room with new cabinets, counters, and flooring |
| Large or upscale kitchen | $60,000 | $95,000 | $150,000+ | Custom cabinetry, premium finishes, or reconfigured layout |
| Bathroom remodel | $8,000 | $20,000 | $40,000+ | Typical full bath; premium tile and plumbing changes raise the price |
| Design or planning fee | $0 | $1,500 | $5,000 | May be separate, credited toward construction, or included |
What a Thompson Price Kitchen and Bath remodel may cost
For budgeting, a modest kitchen update often costs $8,000-$30,000, while a full midrange renovation commonly falls between $25,000 and $60,000. A full bathroom remodel is often $12,000-$30,000; a small cosmetic refresh can be below that range, while a large primary bath can exceed $40,000. These are broad U.S. project estimates, not confirmed company quotes.
For a standard 150-200 sq ft kitchen with midrange materials, a practical planning figure is about $42,000. That assumes replacement cabinets, new countertops, flooring, backsplash, and installation without moving major plumbing or walls. A standard 40-60 sq ft bathroom with a new tub or shower, vanity, tile, and fixtures may average around $20,000.
Per-unit prices help compare quotes when room sizes differ. Kitchen remodeling may run roughly $150-$300 per sq ft for a conventional midrange project, but this metric can mislead because cabinets and appliances are not priced evenly by floor area. Bathroom work commonly runs $200-$450 per sq ft, with waterproofing and tile labor making small rooms expensive per square foot.
Assumptions: U.S. midrange materials, professional installation, normal access, no structural repairs, and no major utility relocation. Local contractor rates and the company’s actual scope may differ.
How cabinets, tile, and labor shape the renovation quote
A contractor’s proposal should separate major trades and materials, or clearly identify what is included in a fixed project price. The table below gives typical midrange allowances; actual line items vary with room size, product selections, and whether the contractor supplies materials.
| Cost component | Kitchen range | Bathroom range | Typical unit or scope | What changes the price |
|---|---|---|---|---|
| Cabinets or vanity | $5,000-$18,000 | $800-$4,000 | Kitchen set or one vanity | Stock, semi-custom, custom, finish, storage features |
| Countertops or tile | $2,000-$7,000 | $1,500-$6,000 | Countertop: $40-$150 per sq ft installed; tile varies by area | Material grade, edge work, patterns, waterproofing |
| Installation labor | $8,000-$20,000 | $5,000-$14,000 | Multiple trades and project management | Local rates, access, demolition, detail level |
| Plumbing and electrical | $1,500-$6,000 | $1,000-$5,000 | Fixture, outlet, lighting, or line changes | Relocation, code updates, hidden damage |
| Removal and disposal | $800-$3,000 | $400-$1,800 | Old cabinets, fixtures, flooring, debris | Material volume, hauling distance, dump fees |
| Permits and contingency | $300-$2,500 | $150-$1,200 | Permit fees plus reserve for surprises | Municipality, project scope, concealed conditions |
Labor is often the largest variable because kitchen and bath projects combine carpentry, plumbing, electrical work, tile setting, and finish installation. A simplified labor estimate is . At a blended $75-$125 per hour, 120-200 labor hours represent $9,000-$25,000 before materials and some project-management charges.
Ask whether the stated total includes demolition, delivery, disposal, permits, and finish materials. A lower quote may exclude those items or use allowances that can increase after selections. The same cabinet or tile allowance should be compared across bids to avoid treating different scopes as equivalent.
Which room dimensions and material grades change the total
Cabinet quantity, countertop area, and tile coverage matter more than the room’s label. In a kitchen, moving from 20 linear ft of stock cabinets to 30 linear ft of semi-custom cabinets can add several thousand dollars before installation. Cabinet pricing commonly spans about $150-$750 per linear ft installed, depending on construction, finish, and configuration.
Bathroom tile scope has a similarly large effect. A tub surround covering roughly 60-80 sq ft may cost $1,500-$4,500 installed with ordinary ceramic tile; extending tile across a 100-150 sq ft floor and shower can bring tile work to $4,000-$10,000. Natural stone, intricate patterns, niches, and waterproofing details generally raise both material and labor charges.
Layout changes are another major threshold. Keeping sinks, toilets, and ranges in their existing locations usually avoids extensive rerouting. Moving a kitchen sink more than a few feet, relocating a toilet, or changing a gas range location can add roughly $1,000-$5,000 or more, depending on access below the floor, venting, and local code requirements.
Old-house conditions can turn a planned replacement into repair work. Water damage, uneven subfloors, outdated wiring, or lead-safe procedures may add $500-$5,000 or more after demolition exposes the issue. A reasonable budget reserve is 10%-15% of the construction amount for a straightforward project and 15%-20% for older homes or extensive tile and plumbing work.
Room size alone does not predict the quote; cabinet length, tiled area, and whether utilities move are better comparison points. Ask the estimator to state quantities, material grades, and allowances, and to explain how concealed damage is priced before work begins.
When regional labor rates and busy seasons affect bids
Remodeling prices vary by market. Large coastal cities and high-cost metro areas can run about 15%-30% above broad national planning ranges; smaller towns and rural markets may be 5%-15% lower, although limited contractor availability or long travel distances can erase that difference. These are planning comparisons, not location-specific rates for Thompson Price Kitchen and Bath.
Labor availability can also affect scheduling and overhead. Spring and early summer often bring heavier demand for residential work, while winter may offer more scheduling flexibility in some climates. However, indoor remodeling is less weather-dependent than exterior construction, and a discount should not be assumed. The contract should specify when the price expires and whether material costs can change before ordering.
Local permit charges vary widely. A cosmetic cabinet or fixture replacement may need no building permit in some jurisdictions, while electrical changes, plumbing relocations, or structural work commonly trigger permits and inspections. Fees may be a few hundred dollars for limited work and several thousand dollars for larger permitted projects. The local building department, not a general national estimate, determines requirements.
Compare quotes from contractors working in the same local market and with the same project scope. If a quote is unusually low, verify insurance, permit responsibility, product specifications, cleanup, and the written process for change orders rather than comparing only the headline total.
How many workdays kitchen and bath crews usually need
A small kitchen refresh may take 1-3 weeks of on-site work, while a full kitchen remodel often takes 4-8 weeks. A bathroom refresh may require 1-2 weeks, and a full bathroom renovation often takes 3-6 weeks. These periods can stretch when cabinets are made to order, inspections are delayed, or custom tile requires extra setting and curing time.
On-site days do not always equal continuous crew attendance. Demolition, rough plumbing, electrical work, inspections, cabinets, counters, and finish work may be scheduled in separate visits. Countertop fabrication commonly follows cabinet installation and measurement, adding a waiting period that does not necessarily mean more billable labor days.
Labor quotes can be hourly, cost-plus, or fixed-price. For an hourly arrangement, ask for the expected crew size, estimated hours, supervisor charges, and approval threshold for extra work. A two-person crew working 8 hours a day for 10 days represents 160 person-hours; at $75-$125 per hour, that labor benchmark is $12,000-$20,000 before materials and project-specific fees.
The schedule and the labor charge should be evaluated together. A longer calendar duration may reflect product lead times rather than paid daily labor, while a short schedule can rely on a larger crew or overtime. The contract should define working hours, site access, cleanup, and responsibility for delays caused by backordered products.
Which scope choices lower a kitchen or bath bill
Keeping the existing layout is often the strongest cost-control measure. Retaining sink, toilet, range, and major appliance locations can avoid pipe, vent, gas, and electrical rerouting. Before approving a design, ask for one price with the current layout and a separate alternate price for each proposed relocation.
Cabinet choices offer another clear tradeoff. Refacing or repainting sound cabinets may cost about $3,000-$10,000 for a typical kitchen, compared with roughly $5,000-$18,000 for replacement cabinets and installation. Refacing is not appropriate for swollen boxes, failed joints, or poor storage layouts, so the estimate should identify which existing components can be reused.
Standard-size stock cabinets, common countertop colors, and straightforward tile patterns can reduce fabrication and installation time. A simple ceramic tile layout may cost $8-$20 per sq ft installed, compared with approximately $20-$50 per sq ft for labor-intensive natural stone or complex patterns. Product prices vary, so compare the exact material specification rather than the category name alone.
Separate necessary work from aesthetic upgrades before signing. Keep a written list of must-haves, acceptable substitutes, and optional items such as heated floors, specialty storage, or decorative lighting. Doing some demolition or purchasing materials independently may not save money if the contractor excludes warranty coverage or charges for coordination, so get written approval first.
When repair beats full replacement for cabinets and fixtures
Replacing every cabinet or fixture is not always the least expensive way to solve a functional problem. If cabinet boxes are square and dry, replacing doors, hardware, or drawer slides may restore appearance and usability for less than a full cabinet package. Likewise, reglazing a sound bathtub can cost about $400-$1,000, compared with roughly $1,500-$5,000 to replace a tub and make related plumbing or surround repairs.
Repair makes less sense when there is recurring leakage, extensive mold, unstable flooring, failing cabinet boxes, or fixtures that cannot meet the intended layout. A repair quote should describe the expected service life and warranty, while a replacement quote should include demolition, disposal, installation, and any required water-damage repair.
Keep the comparison on equal terms. For example, a new vanity price without a faucet, top, plumbing hookup, or disposal is not directly comparable to an installed vanity package. Ask for the repair option and replacement option as separate, itemized alternatives, including any work that would be required in either case.
Repair is most useful when the underlying structure is sound and the problem is limited to a replaceable surface or component. If a contractor recommends full replacement, request the specific condition that makes repair unsuitable and the price difference between the alternatives.
Questions that make a Thompson Price estimate easier to compare
Request a written scope that lists demolition, installation, material brands or grades, quantities, and finish details. It should state whether design services are included, whether allowances are fixed or adjustable, and how substitutions affect the total. A proposal that says only “new kitchen” or “bath renovation” does not define enough scope for a reliable comparison.
Ask who obtains permits and schedules inspections, who orders and receives materials, and who pays for damage discovered after demolition. Confirm whether the contractor uses employees or subcontractors, carries applicable insurance, and provides a workmanship warranty. Warranty length alone is not a complete measure; the written terms should explain exclusions, response time, and claim procedure.
For a realistic comparison, obtain two or three bids based on the same plans and finish schedule. Compare the total price, payment milestones, estimated start and completion windows, allowances, change-order rates, and cleanup obligations. Avoid paying the full contract amount upfront; payments should correspond to defined project progress and comply with state and local requirements.
Because the company’s current rates are not publicly confirmed, only a direct, itemized quote can establish its actual price. Provide room measurements, photos, desired materials, and a clear list of work when requesting an estimate, then ask the contractor to identify exclusions and the conditions that could change the amount.