Wall mount range hood installation typically costs $500-$2,500 total, with an average near $1,200 for a midrange hood and a straightforward installation. The final price depends mainly on the hood itself, whether a suitable duct already exists, vent-route length, cabinet or wall changes, and local labor rates.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed wall mount hood | $500 | $1,200 | $2,500 | Hood, standard labor, and typical connection work |
| Range hood unit | $200 | $700 | $1,800 | Price varies by width, finish, airflow, and controls |
| Installation labor | $250 | $500 | $1,000 | Existing ducting costs less than a new route |
| New ductwork | $300 | $800 | $1,800 | Long, concealed, or roof-routed ducts can cost more |
| Removal and disposal | $50 | $125 | $250 | May be included in a full installation quote |
What a wall mount range hood costs installed
A typical project with a $400-$900 hood, an existing usable wall or roof vent, and ordinary access runs about $800-$1,600. An entry-level hood and direct replacement may bring the total down to $500-$900. A premium hood, new ductwork, or wall repairs can push the bill to $2,000-$3,500 or more.
For a standard 30-inch hood replacing an existing vented unit, budgeting about $1,000-$1,400 is a practical starting point. That estimate assumes a midrange appliance, a short connection to compatible ducting, no electrical relocation, and labor in a typical U.S. market. High-cost metro areas or difficult access may exceed it.
Wall mount hood prices range from roughly $200-$500 for basic models to $600-$1,200 for many midrange stainless-steel units. Models with stronger blowers, quieter operation, decorative chimneys, advanced controls, or premium finishes commonly cost $1,200-$2,500. A custom or professional-grade unit can cost more, before installation.
Installers often quote a simple replacement separately from duct installation. A replacement using existing mounting support and a suitable vent may require only a few hours. Adding a new exterior opening, changing duct size, or routing through an attic can require several trades or multiple visits.
Assumptions: 30-inch hood, standard residential construction, ordinary access, and no major cabinet, electrical, or structural changes.
How the hood, labor, and ductwork shape the quote
Quotes can combine the appliance, installation labor, duct materials, disposal, and minor electrical work. Requesting an itemized estimate makes it easier to see whether a low bid excludes ducting, wall patching, or removal. Costs below are common planning ranges, not fixed national rates.
| Quote component | Typical price | What changes the charge | Common unit |
|---|---|---|---|
| Range hood | $200-$1,800 | Width, airflow, controls, finish, brand tier | $200-$2,500 per unit |
| Mounting and connection labor | $250-$700 | Wall condition, mounting height, wiring, removal | $75-$150 per hour |
| Duct and exterior vent parts | $75-$350 | Duct diameter, elbows, cap, route and length | $10-$35 per linear ft for basic duct materials |
| New duct installation | $300-$1,500 | Concealment, floor or roof access, opening location | $20-$60 per linear ft installed, where applicable |
| Removal, patching, disposal | $50-$500 | Old unit condition and finish repair needed | $50-$250 for removal alone |
Labor pricing varies by trade and market. A contractor may charge a minimum service fee even when the installation takes less than a full day. Electrical changes, drywall repair, painting, or roof work may be priced by separate specialists rather than included in the installer’s base rate.
Labor cost is roughly the time required multiplied by the local hourly rate, plus any service minimum or subcontractor charge. For example, 4-6 hours at $90-$140 per hour implies $360-$840 in time-based labor before a minimum fee, materials, or additional trade work.
Which duct diameter and route raise installation prices?
Duct compatibility is one of the biggest price variables. Many residential hoods require a 6- or 8-inch duct, but the appliance manual determines the correct size. A hood designed for an 8-inch outlet should not be paired with a smaller duct simply to reuse an existing route; reductions can affect performance and may conflict with manufacturer instructions or local requirements.
A short, straight duct through an exterior wall is generally less expensive than a route through cabinets, an attic, or a roof. Basic new duct installation may add $300-$800 when the path is accessible and fairly direct. A concealed route with several elbows, difficult framing, or roof penetration can add $800-$1,800 or more.
Each added run length, bend, or inaccessible ceiling area can increase labor and may require a more capable hood. A 6-10-foot direct run is often simpler than a 15-25-foot route with multiple turns. The contractor should confirm duct diameter, allowable equivalent length, and termination location against the hood specifications.
Exterior wall material also matters. Cutting through vinyl siding or wood framing is usually simpler than working through brick, stone, concrete, or tile. Masonry work may add $200-$700, depending on thickness, access, and finish repair. Roof exits can add flashing, weatherproofing, and roofing labor.
Hood width and mounting height affect installation planning. Common widths are 30 and 36 inches, and the hood must fit the cooking surface and the manufacturer’s clearance requirements. Moving the hood location or altering cabinets can add $150-$800 for modifications before finish repair.
Assumptions: Duct pricing varies with route access and finish materials; confirm the required duct size and maximum run in the product manual.
How many hours does wall hood installation take?
A direct replacement with an existing compatible vent commonly takes 2-4 hours. A new wall opening and short duct route may take 4-8 hours, while a concealed or roof-terminated route can require a full day or more. These are on-site labor estimates; scheduling a roofer, electrician, or drywall finisher can extend the calendar time.
Existing ductwork and wiring in the right locations can save several hours compared with a new installation. Installers may charge $250-$700 for straightforward mounting and connection, while complex work can bring labor to $700-$1,500 or higher. A service minimum of approximately $100-$250 may apply for a small standalone job.
Before scheduling, the homeowner can confirm the hood is on site, the correct model and mounting hardware are available, and the cooktop-to-hood clearance is understood. The installer should verify the wall can support the unit and that the duct terminates outdoors rather than into an attic or enclosed space.
If the old unit is being removed, clarify whether disposal is included. Removal and disposal often add $50-$250. If the old hood is hardwired or the new model needs a different circuit arrangement, an electrician may charge another $150-$500, depending on wiring access and required changes.
Why labor rates differ between U.S. markets
Labor and project totals tend to be higher in major coastal metros and dense cities than in many rural areas. A comparable installation may cost about 10%-25% more in a high-cost metro, while rural quotes can be 5%-15% below a broad-market baseline. These are general planning differences; travel distance and contractor availability can reverse the comparison locally.
Location changes labor and service charges more consistently than the price of the same branded hood. A $1,200 standard project in a midpriced market might reach $1,320-$1,500 in an expensive city if labor, parking, or building access adds cost. In a lower-cost region, a similar scope might land around $1,020-$1,140, assuming comparable materials and no travel fee.
Older homes, apartments, and townhomes can cost more when access is limited or building rules require coordination. Some multifamily properties require approval for exterior penetrations, scheduled work hours, proof of insurance, or a designated contractor. These requirements can add administrative time or prevent a direct wall route.
Get quotes from contractors who have inspected the intended duct path, rather than comparing a detailed site-specific bid with a low phone estimate. Ask whether the price includes travel, removal, permits if needed, exterior venting, and finish repair.
Three wall hood quotes with different installation scopes
The duct route, not just the appliance price, explains much of the difference between these realistic project totals. The examples below assume ordinary residential work and show how comparable equipment can lead to different installed prices.
| Project | Hood and scope | Labor estimate | Estimated total |
|---|---|---|---|
| Direct replacement | $350 hood; existing 6-inch duct and wiring; removal included | 3 hours at $100-$125 per hour | $700-$950 |
| New short wall vent | $700 hood; 30-inch unit; 6-8-foot duct through siding | 5-7 hours at $100-$140 per hour | $1,300-$2,000 |
| Premium roof-routed install | $1,400 hood; 36-inch unit; 15-20-foot concealed duct and roof cap | 8-12 hours across trades at $110-$160 per hour | $2,700-$4,200 |
The direct replacement estimate includes modest mounting supplies and a basic disposal charge. The short-wall-vent example allows for duct parts, an exterior cap, and a new wall opening. The roof-routed scenario includes more difficult access and possible roofing work; local bids may differ substantially if the route is unusually complex.
When comparing proposals, check that each quote describes the same hood, duct diameter, route, exterior termination, removal, electrical scope, and finish work. A quote that excludes the appliance may appear cheaper while leaving the largest purchase outside the stated total.
When permits, electrical work, or wall repair add charges
Permits for a range hood are not required for every replacement, but rules vary by city and by whether the job changes electrical wiring, creates a new exterior opening, or affects building systems. Permit and inspection charges, where applicable, may run about $50-$300. The contractor or local building department can confirm the requirement before work begins.
New wiring, a relocated outlet, or a challenging exterior penetration can add more than the permit itself. Minor electrical work may cost $150-$500; a new circuit or substantial wiring changes can reach $500-$1,200, depending on panel capacity and access. Do not assume the existing connection is suitable for a different model without checking its installation requirements.
Wall and ceiling repairs are frequently excluded from the hood installer’s base quote. Small drywall patching may cost $100-$300, while larger repairs, texture matching, tile work, or repainting can cost $300-$1,000 or more. Brick or stone cutting and repair can also raise the total beyond the basic duct allowance.
Some hoods include a recirculating option with charcoal filters, but that setup is not equivalent to exhausting air outdoors. If external venting is required or preferred, the price should include an approved duct route and exterior termination. Filter replacement is a separate upkeep expense, commonly around $20-$100 per filter set, depending on model.
How to lower the wall mount hood installation price
Keeping the new hood near the existing vent location is often the most effective cost decision. Reusing a sound, correctly sized duct can avoid several hundred dollars in cutting, routing, and finish work. Confirm that the existing duct is clean, terminates outdoors, and meets the new hood’s specifications before treating it as reusable.
Choose the appliance for the cooking setup and required specifications, rather than paying for capacity or features the kitchen does not need. A $300-$700 model may suit a straightforward installation, while premium blower capacity, decorative finishes, and extra controls can add $500-$1,500 or more. Do not compromise on correct duct sizing or manufacturer clearances to reduce the bid.
Ask for separate prices for mounting, ductwork, electrical work, disposal, and wall repair. This shows which items are essential and allows useful comparison across at least three written estimates. Each contractor should inspect or clearly document the route; a quote based only on a photograph may leave out hidden framing or access problems.
Handle simple preparation in advance when the installer permits it: clear the work area, remove items from nearby cabinets, and confirm building access or parking. Avoid removing an old hood or opening a wall unless the contractor approves, since damage or an unsafe disconnection can increase labor. Scheduling during a less busy period may also improve appointment availability, though price reductions are not guaranteed.
Finally, compare repair with replacement when an existing hood is failing. A fan or switch repair may cost roughly $100-$400, while a motor replacement can be $200-$600, depending on parts and access. If the hood is old, damaged, or incompatible with the needed vent route, repair savings may be short-lived; compare the repair quote with the installed price of a suitable replacement.