Page wire fence cost usually runs about $4-$9 per linear foot installed, with a typical 330-foot project costing roughly $1,320-$2,970. Fence height and mesh, post type, terrain, gates, and the amount of clearing or old-fence removal can move a quote substantially.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Installed page wire fence | $4 per linear ft | $6.50 per linear ft | $9 per linear ft | Standard agricultural fence, accessible ground |
| 330 linear ft installed | $1,320 | $2,145 | $2,970 | Excludes unusual clearing and major gate work |
| Wire material only | $1.50 per linear ft | $2.75 per linear ft | $4.50 per linear ft | Varies with height, gauge, and coating |
| Basic gate allowance | $150 | $400 | $900 | Gate, hardware, and installation vary by width |
Assumptions: U.S. rural or suburban labor, common galvanized woven wire, standard posts, and a reasonably accessible fence line.
What a 330-Foot Page Wire Fence Usually Costs
For a straightforward 330-foot run, a homeowner or landowner can budget about $1,320-$2,970 installed, or approximately $2,145 at the midpoint. That estimate assumes standard field fencing, typical line posts, corner bracing, and ordinary installation access. A 660-foot boundary would commonly cost $2,640-$5,940 before gates, removal, or difficult ground are included.
For a quick estimate, multiply the planned fence length by $4-$9 per linear foot, then add gates and site work. A low quote usually involves flat, cleared ground and economical posts. The high end is more likely when the fence is taller or heavier, posts require more labor, or the crew must work around rocks, brush, slopes, or existing structures.
Wire material is only part of the price. A complete installation also needs posts, fasteners, tensioning, corner and end assemblies, and labor. An estimate that lists only the wire roll price is not directly comparable with a turnkey quote that includes setting posts, stretching the mesh, cleanup, and disposal.
How Posts, Wire Rolls, and Installation Shape the Quote
A contractor’s quote typically separates the fence materials from the work required to make the run stable and taut. Posts and bracing can account for a large share of the materials budget, especially when the layout has many corners or gates. The table gives common planning ranges; local availability and the chosen post spacing can change totals.
| Quote component | Low | Average | High | Typical basis |
|---|---|---|---|---|
| Galvanized woven wire | $1.50/linear ft | $2.75/linear ft | $4.50/linear ft | Height, mesh pattern, gauge, coating |
| Line posts and fasteners | $0.75/linear ft | $1.50/linear ft | $3/linear ft | Steel T-posts versus wood or heavier posts |
| Braces and corner assemblies | $100 | $250 | $600 | Per project; more corners raise the total |
| Installation labor | $1.50/linear ft | $3.25/linear ft | $5/linear ft | Setting posts, stretching wire, attaching mesh |
| Delivery and disposal | $0 | $150 | $500 | Material haul, old fence, or site debris |
These line items are planning ranges, not fixed charges. Some installers price the job as a single per-foot rate, while others bill materials, equipment, and crew time separately. A quote should identify whether it includes corner braces, pull assemblies, fasteners, delivery, taxes, and cleanup.
Labor can be compared by multiplying crew hours by the quoted hourly rate, but the proposal should also state the fence length and included tasks. Fence stretching and bracing are essential work; a low labor figure may omit them or assume the customer handles preparation.
How Height, Mesh Gauge, and Terrain Change the Rate
Fence height is a direct material driver. A basic 3- to 4-foot fence for small livestock or property division often fits the lower price range. A 5- to 6-foot fence uses more wire and may need stronger posts or added support; it can raise the installed rate by roughly 10%-30%, depending on mesh weight and post spacing.
Wire gauge and mesh design also matter. Lighter wire and wider openings generally cost less than heavier, tighter mesh intended to resist pressure or contain smaller animals. Moving from a basic field-fence roll to a heavier galvanized product can add roughly $0.50-$2 per linear foot in material. Buyers should match the opening size and wire strength to the animals and use rather than paying for a specification that is not needed.
Ground conditions change the labor portion. Rocky soil can slow post installation or require drilling, adding about $1-$4 per foot on affected sections. Steep or uneven runs may require closer posts, extra bracing, or stepped installation, often adding 15%-40% to the affected work. A long, straight run with few corners is usually less expensive per foot than the same footage divided among short sections and gates.
Length alone does not determine the unit price: a 5-foot heavy-gauge fence on rocky ground can cost much more per foot than a 4-foot fence on level soil. Ask the estimator to identify the assumed fence height, wire specification, post material, and spacing so bids reflect the same design.
Where to Trim the Budget Without Weakening the Fence
Keeping the fence line straight and limiting unnecessary jogs can reduce corner assemblies, cutting, and installation time. Before requesting bids, mark the desired route and gate locations, and confirm the length with a measuring wheel or site plan. Each extra corner can require bracing and additional labor, so a simpler route can save money without reducing fence quality.
Choose the wire and post system for the intended use rather than automatically selecting the heaviest grade. A standard galvanized field fence may be suitable for a basic boundary, while livestock pressure, wildlife, or high-traffic areas can justify stronger materials. Ask for a price difference between two specific mesh or post options instead of accepting a broad “upgrade” allowance.
Clearing light brush and moving stored materials before the crew arrives may lower labor time, provided the contractor agrees that customer preparation is safe and adequate. Compare at least three written quotes using the same footage, fence height, mesh, post spacing, gates, and removal scope. The most useful savings come from controlling scope and comparing equivalent specifications, not from omitting corner bracing or proper wire tension.
What Fence Crews Charge for Rural Installation
Installation labor often falls around $1.50-$5 per linear foot within a complete quote, with crew rates and productivity depending on local wages, equipment, and site access. A small crew may finish a clear, straight 330-foot run in one to two workdays. Difficult post holes, numerous corners, or work around trees can extend the schedule and increase labor charges.
Some contractors quote by the foot; others use a daily or hourly rate. When hourly pricing is used, a small crew may bill around $75-$150 per crew-hour, depending on market and equipment. Confirm whether that amount covers one worker or the full crew. A per-foot quote is easier to compare when every bidder uses the same fence design and explains how extra work will be charged.
Mobilization can make short projects expensive per foot. A crew may have a minimum charge of $300-$800 for a small repair or brief installation, even when the work takes only a few hours. Longer rural projects may also include equipment transport or a delivery fee. Ask whether the bid includes layout, hole digging, post setting, stretching, fastening, and job-site cleanup.
How Removal, Gates, and Corner Bracing Add Up
Taking out an existing fence commonly adds about $1-$4 per linear foot, depending on whether the wire can be rolled easily, posts must be pulled, and debris needs hauling. Heavy vegetation intertwined with the old fence can push removal higher. Some contractors price disposal separately, so a low removal charge may not include a dump or recycling fee.
A basic walk-through gate may add roughly $150-$400 installed. Wider vehicle or farm gates can run $400-$900 or more when stronger hinges, a longer span, or substantial gate posts are required. Gate hardware and bracing matter because a gate concentrates force at its attachment points; a quote should show whether those posts are included in the gate price or the fence rate.
Corner, end, and pull assemblies keep a tensioned woven fence from leaning or sagging. A small project with two ends and few turns may need a modest allowance, while a perimeter with multiple corners can add several hundred dollars. Provide a sketch showing every gate, corner, and fence termination so these costs are priced before work begins.
Three Page Wire Fence Quotes for Common Property Sizes
These examples show how length, access, and scope affect an installed estimate. They assume standard galvanized woven wire, typical bracing, and no permit or major grading expense. Actual prices vary by market and should be confirmed with local bids.
| Project example | Scope and rate | Estimated total |
|---|---|---|
| Small garden boundary | 200 ft, 4-ft wire, flat and cleared; $5-$7/ft | $1,000-$1,400 |
| Livestock paddock | 660 ft, 5-ft heavier mesh, two gates; $6-$9/ft plus $500-$1,000 gates | $4,460-$6,940 |
| Rural perimeter replacement | 1,000 ft, 5- to 6-ft wire, old fence removal and uneven ground; $7-$12/ft | $7,000-$12,000 |
In the 200-foot example, travel or contractor minimums can make the effective per-foot rate higher than the estimate. The paddock example includes a stronger fence and gates, while the replacement example includes more demanding conditions. If a quote falls outside these ranges, compare the specifications and exclusions before treating it as unusually high or low.
Ask each bidder to show the total, the installed rate per foot, and separate prices for gates and removal. This makes it easier to see whether two proposals differ because of labor, material grade, or omitted work.
Why Regional Labor and Ground Conditions Shift Prices
Labor and delivery rates vary across the United States. In lower-cost rural markets, a standard accessible installation may land near $4-$6 per foot. Higher-wage metro areas and regions with limited fencing crews can be about 10%-25% above that range. Remote properties may face travel or mobilization fees, although lower rural wages can offset some of the difference.
Local soil and climate influence the quote as much as geography. Rocky or shallow soil may require drilling or different post methods; soft, wet ground may need deeper posts or closer spacing. In areas with frequent freeze-thaw cycles, post depth and bracing requirements can increase. A contractor familiar with local soil and livestock conditions can explain whether the added work is necessary for a durable installation.
Seasonal demand can also affect scheduling and price. Spring and early summer are busy periods in many agricultural areas, and urgent work during peak season may come with limited availability or a premium. Scheduling during a quieter period may help, but weather, frozen soil, and muddy access can make installation impractical. Compare local quotes using the same material specification and ask whether travel, equipment, or seasonal charges are included.