A Home Depot wrought iron fence project typically costs about $25-$75 per linear foot for materials and professional installation, with a common 100-foot project totaling $2,500-$7,500. The exact price depends on whether the product is steel or aluminum, fence height, gates, site preparation, and local labor rates; many products marketed as wrought iron are actually ornamental steel or aluminum.
| Item | Low | Average | High | Notes |
|---|---|---|---|---|
| Fence panels | $70 each | $120 each | $250 each | Often 6-8 ft wide; material and height affect price |
| Materials per linear foot | $15 | $30 | $55 | Panels, posts, brackets, and basic hardware |
| Installed fence per linear foot | $25 | $50 | $75 | Standard residential access and installation |
| 100-foot installed project | $2,500 | $5,000 | $7,500 | Excludes major grading, unusual access, and premium gates |
| Walk gate | $150 | $350 | $800 | Gate price before installation and hardware upgrades |
What Home Depot ornamental fence panels cost per foot
Home Depot pricing varies by store, ZIP code, product availability, and online promotion. Product listings may describe panels as ornamental metal, steel, or aluminum rather than wrought iron. As a planning estimate, a basic metal panel costs about $70-$150, while taller, heavier, or more decorative panels can reach $150-$250 or more. Check the product specification and local listing before treating a displayed price as a project quote.
For a 6-foot-wide panel, those figures work out to roughly $12-$42 per linear foot for panels alone. Posts, brackets, caps, and fasteners can add about $3-$12 per linear foot, depending on spacing and finish. A materials-only project commonly lands around $15-$55 per linear foot. Assumptions: residential ornamental fencing, standard panel widths, ordinary access, and no major slope correction.
A practical planning range is $15-$55 per linear foot for materials and $25-$75 per linear foot installed. A 100-foot fence therefore may cost $1,500-$5,500 for materials or $2,500-$7,500 with typical professional installation. Local labor, gate count, and site conditions can push a quote beyond that range.
How panels, posts, gates, and labor shape the quote
A fence estimate is more than the panel price shown online. Posts must be set at the correct intervals, panels need compatible brackets, and gates require hinges, latches, and often heavier support posts. Contractors may also charge for delivery, removal of an existing fence, concrete, and cleanup. Ask whether the quote includes sales tax, delivery, and disposal so the total is comparable with a materials-only Home Depot cart.
| Quote component | Typical price | Common basis | What changes it |
|---|---|---|---|
| Steel or aluminum panels | $12-$42 per linear ft | Panel price spread across width | Height, gauge, style, coating |
| Posts and brackets | $3-$12 per linear ft | Posts, caps, and connectors | Spacing, corner count, concrete |
| Installation labor | $10-$30 per linear ft | Layout, post setting, panel mounting | Soil, slope, access, crew rates |
| Gate and hardware | $150-$800 per gate | Basic walk gate before labor | Width, design, lock, reinforced posts |
| Removal and disposal | $3-$10 per linear ft | Existing fence taken down and hauled | Material, concrete, disposal distance |
Posts, gates, and labor often account for as much of the bill as the panels themselves. For labor estimates, a useful comparison is ; residential fence crews may charge about $50-$100 per worker-hour, although many contractors price by the linear foot or whole project.
Which height, metal, and layout details raise the price
Height is a direct cost driver: a 4-foot panel is generally less expensive than a 6-foot panel, while 6-foot fencing may require heavier posts and more digging. A standard residential panel may span about 6-8 feet; shorter spans can increase post and hardware counts. A 150-foot run using 6-foot panels needs about 25 panels before accounting for gates, corners, and adjustments. Confirm the actual panel width rather than estimating from a photo.
Metal type also matters. Powder-coated aluminum commonly costs about $15-$35 per linear foot for materials, while ornamental steel is often around $20-$55 per linear foot, depending on weight and finish. Heavier steel can feel more substantial but may need more labor to handle and protect from corrosion. A run with three or more corners, a sharp slope, or multiple gates takes more layout work than a straight line.
Height, panel width, metal weight, and site geometry can change the quote by hundreds or thousands of dollars. A 4-foot, straight 50-foot run with one basic gate differs substantially from a 6-foot, 150-foot installation with several corners and a driveway opening. Ask for the estimate to state the panel height, material, finish, post spacing, and total linear footage.
How to cut the Home Depot fence bill through scope control
Measure the boundary carefully before buying panels. Include gates and corners in the layout, and avoid ordering extra panels based only on a rough perimeter estimate. A small measurement error across a long run can leave a costly surplus or require a second delivery. Have underground utilities marked before digging; relocating a post after installation can add labor and material expense.
Compare products with the same height, panel width, metal, finish, and warranty. A lower panel price may not include posts or compatible brackets, so compare complete materials lists rather than one SKU. Choosing a simple style, standard color, and common panel width can reduce both product expense and cutting time. If the existing posts are sound and correctly spaced, ask whether they can remain, but do not assume they are compatible with new panels.
The most reliable savings usually come from accurate measurements, a simple layout, and a complete like-for-like quote comparison. Schedule work before purchasing if the installer needs to verify the product, post spacing, or local requirements. Keep a 5%-10% contingency for minor surprises, but avoid buying premium accessories or decorative upgrades unless they solve a specific need.
How long a metal fence installation takes and what labor costs
A straightforward 100-foot residential installation may take a two- or three-person crew about one to three working days. A typical labor allowance is $10-$30 per linear foot, or roughly $1,000-$3,000 for 100 feet. The lower end assumes clear access, ordinary soil, a straight layout, and no existing fence to remove. Post-hole digging, concrete curing, slope adjustments, or a large gate can extend the schedule.
Contractors may quote a fixed project price rather than an hourly rate. An hourly comparison can still help assess unusual charges: a small crew billed at $50-$100 per worker-hour may spend 16-40 total worker-hours on a 100-foot job. Assumptions: typical residential crew, moderate soil, and no major rock or retaining-wall work.
Labor is most predictable when the fence line is accessible and the ground is reasonably level. Ask whether the price includes layout, post holes, concrete, panel installation, gate adjustment, and cleanup. If labor is quoted separately, confirm whether mobilization or a minimum job charge applies; smaller projects can have a higher per-foot rate.
Regional differences in installed ornamental fence prices
Labor rates and delivery costs vary across the country, so a national range is only a starting point. A standard installation in a lower-cost rural or small-city market may come in about 10%-20% below a broad national estimate. Large metropolitan areas and high-cost coastal markets may run 15%-30% above it. These differences usually reflect labor availability, contractor overhead, transportation, and local demand rather than a different panel price alone.
For example, a 100-foot job estimated at $5,000 using a middle-of-the-range price could be about $4,000-$4,500 in a lower-cost market or $5,750-$6,500 in a high-cost metro. Steep terrain, rocky soil, narrow access, and dense urban delivery conditions can add further expense in any region. Store availability can also affect the price of specific Home Depot products and whether delivery is required.
Compare at least two local installation quotes using the same product specifications and included services. A price that appears lower may omit concrete, old-fence removal, gate hardware, or disposal. Ask contractors to identify any local permit or inspection charges separately rather than assuming they are included in the labor rate.
When steel panels cost more than aluminum alternatives
Steel and aluminum ornamental fences can look similar, but their purchase and ownership costs differ. Basic aluminum panels often cost less to handle and resist rust, while steel may offer a heavier feel and a wider range of traditional designs. Approximate material pricing is $15-$35 per linear foot for many aluminum options and $20-$55 for ornamental steel; installed totals commonly fall within the broader $25-$75-per-foot range.
Do not treat every decorative metal panel as true wrought iron. Modern retail fencing is commonly made from steel or aluminum, and true wrought iron is less common and can be substantially more expensive. Product descriptions should specify the base metal, coating, panel dimensions, and warranty. In coastal or persistently damp settings, coating quality and maintenance requirements matter as much as the initial price.
Compare the metal and finish, not just the phrase “wrought iron” in a listing. A lower-cost aluminum fence can make sense where reduced weight and corrosion resistance matter; steel can be worth a higher material price when its design or heavier construction matches the project. Get the expected finish maintenance and warranty terms in writing.
What removal, gates, delivery, and permits can add
Taking out an existing fence may add about $3-$10 per linear foot, with disposal included in some quotes and charged separately in others. Concrete footings, buried posts, thick vegetation, and difficult haul-away access can increase that charge. Delivery fees vary by store, distance, order size, and whether panels require a special shipment; confirm the fee before relying on the displayed product price.
A basic walk gate may cost $150-$350, while a larger or more decorative model can run $350-$800 before installation. Installation may add about $100-$400 per gate, especially when reinforced posts, custom latches, or alignment work are needed. Driveway gates are a separate category and can cost far more, particularly when automation is included.
Permit requirements differ by city and county. A permit or inspection may cost roughly $50-$300 where required, and some jurisdictions impose height, setback, visibility, or pool-barrier rules. Verify local rules and utility locations before ordering panels or digging post holes. A code-driven change after installation can cost more than checking the requirements during planning.
When a repair or simpler layout beats full replacement
Replacing every panel is not always necessary. If damage is limited to one or two panels and the posts remain stable, replacing individual sections may cost about $100-$400 per panel installed, depending on product match and labor minimums. A small repair visit can cost more per panel than a large installation because the crew still has travel and setup time. Matching an older color or panel profile may also be difficult.
For a full project, reducing the fence length or choosing a straight run can lower both material and labor costs. Each gate, corner, and step in a sloped run adds layout or hardware needs. A 50-foot installation may cost about $1,250-$3,750 installed at the broad typical range, while a 150-foot run may be roughly $3,750-$11,250; actual per-foot pricing can be higher on small jobs because of minimum charges.
Repair is most economical when the existing posts and neighboring panels are sound and a close match is available. For a replacement quote, request separate pricing for repair, partial replacement, and complete replacement. That comparison makes it easier to see whether the added cost buys needed structural work or merely replaces usable sections.